Motion Control – Linear Bearings Application

Motion Control Application – How Do You Move Articles of Antiquity?

“Very Carefully” With A High Load Rail System from LM76!

E. Longmeadow, MA – — Motion Control – Application -The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

Motion Control – Parvalux Company News

Motion Control – In today’s marketplace it is important for suppliers to broaden their reach and expertise in multiple industries. Hiring the right sales representatives can not only increase a company’s capabilities but provide additional services as well.

Motion Control – Parvalux (by maxon), is the UK’s largest manufacturer of fractional horsepower, geared, electric motors. The company provides components and systems to OEMs worldwide in markets such as industrial automation, materials handling, and building automation.

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm.  The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder.  Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability.  The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification.

Motion Control – Voice Coil Stages

Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The motion control motorized linear stages are fully self-contained. Each stage utilizes one or two voice coil motor(s), a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request.

Motion Control – Miniature Servo Motor Controller

Taunton, MA -Motion Control – Maxon Motor expands its offering of miniaturized controllers with its latest OEM plug-in module. This high performance 4-quadrant PWM servo motor controller is designed to command permanent-magnet-activated brushed and brushless DC motors with Hall sensors up to 48 Watt continuous output and 144 Watt peak output.

Motion Control – Industrial HMI

Motion Control – INTEGRATED WEB SERVER FOR INDUSTRIAL AUTOMATION APPLICATIONS

Vaughan, Ontario, Canada — Motion Control Exor, a leading provider of human-machine interface (HMI) solutions, is proud to announce the release of its eX707M Web industrial HMI. Designed for industrial automation applications, this advanced HMI offers an integrated web server, making it ideal for use in modern factory automation systems. 

Motion Control – Open Aperture Voice Coil Stages!

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.

Motion Control – Tubular Solenoids

Motion Control – Van Nuys, CA – Magnetic Sensor Systems (MSS) has released their S-20-100X model of Pull Type Tubular Solenoids. Their S-20-100X series of solenoids features 18 different solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.

MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” insulation for better protection of the solenoid during longer duty cycles.

Motion Control – the Engineering Edge – Jet Rail

Motion Control – Custom Gearmotors

With digital television fast approaching, camera manufacturers are flooding the market with new, lightweight units, but few companies are providing the professional equipment that goes with the upcoming change.

“We searched across all known small motor manufacturers, but only Maxon Precision Motor was able to provide a motor that met our requirements,”

Fall River, MA — Motion Control  Application – Up until 2006, the only broadcast-use professional motorized Pan/Tilts in the market were very heavy. This is because the equipment was built to hold analog video cameras, which could weigh as much as 50 kg and up. With February 2009 approaching, the final day of transition for digital TV, the leading HD camera manufacturers, Sony and Panasonic, have flooded the US market with new lightweight HD digital cameras, such as HDR-FX1 and AGHVX200, respectively. These new, HD cameras weigh less than 4.5 kg, and that weight continues to drop as the use of flash memory storage devices continue to rise.

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Van Nuys, CA – Motion Control Components – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.).

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks

E. Longmeadow, MA – Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Flange Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing flange blocks now available from LM76 reduce the surface area where mold and bacteria can thrive, even from the most through sanitizing operations. Long life Hybrid Stainless Steel Si3N4 Silicon Nitride Ceramic Ball Bearings in Stainless Steel bearing blocks are coated with a smooth non-water absorbing polyamide coating certified by EHEDG, USDA, and 3-A.

Motion Control – Maxon Partners with MassRobotics

Maxon is teaming up with MassRobotics and other companies, organizations, and leading research centers  to create new innovations across a wide range of applications.

Fall River, MA — Motion Control – MassRobotics and maxon announce a partnership to support the robotics innovation ecosystem through collaboration and exploration of motion control technologies around automation and manufacturing-related applications. With maxon’s extensive expertise and knowledge of electric drives, this partnership will support and advance the latest innovations and technologies in motion control with automation-focused companies in the robotics sector.

Based in the Boston area, MassRobotics is the first and largest independent nonprofit robotics startup escalator in the world whose mission is to grow and support robotics innovators and entrepreneurs.

Motion Control – Precision Positioning Stages!

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Miniature Voice Coil Motor!

Van Nuys, CA – Motion Control Components – Moticont is introducing their most compact miniature hollow core linear actuator; the HVCM-016-010-003-01 Linear Voice Coil Motor, featuring a 0.125 in. (3.2 mm) open aperture and high force-to-size ratio. This miniature open aperture actuator is a true DC Linear Servo Motor. Quiet and clean, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration/deceleration, and high speed. Measuring just 0.625 in. (15.9mm) by 0.625 in. (15.9mm) long at mid-stroke it has a continuous force rating of 5.0 oz. (1.4 N) and a peak force of 15.7 oz (4.4 N) at a 10% duty cycle.

The open aperture of the HVCM-016-010-003-01 Linear Motor allows for optics, illumination, and laser beams. It is ideal for applications such as: Haptic feedback, medical diagnostic equipment, testing, optical focusing, positioning, laser beam steering, wafer handling, dynamic vibration absorption, laser drilling, cutting, welding, and machining applications.

Motion Control – Minuteman Flange Blocks

Motion Control – Maxon to Host the Solar Butterfly

Motion Control – Seeking climate change solutions, the world’s largest sustainability tour is coming to Taunton, Massachusetts. The solar-powered butterfly is a 30-foot-long tiny house in the shape of a butterfly, which charges the electric vehicle it tows

.

Motion Control – The SolarButterfly is focused on reaching millions of people, alerting them to the companies and individuals that are integral in transitioning societies away from fossil fuels toward clean energy technologies. Presently on a four-year journey around the world, the SolarButterfly plans to identify, record, and publicize at least a thousand climate protection pioneers and their solutions.

Motion Control – Stage Features 200 Nanometers Repeatability!

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Proportional Valve Controller Modules!

Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has released eight DIN Rail Mounted Proportional Valve Controller Modules.  These compact, low weight, low cost, highly reliable, Proportional Valve Controller Modules feature both low side and high side drivers. The freewheeling flyback snubber diodes are present.  Designed for open loop operation, they are ideal for: Pressure Control Valves, Flow Control Valves, Solenoids, Actuators, Voice Coil Motors, DC Motors, and Hydraulics. The closed loop version is also available upon request. The input control signals are zero to +5 VDC or zero to +10 VDC.

Motion Control – Hollow Shaft Harmonic Drive!

Motion Control – High Torque Outputs and Flexible Installation Options for Heavy-duty Industrial Applications


Vaughan, Ontario, Canada — Motion Control -Harmonic Drive, a leading provider of precision motion control solutions, is proud to announce the release of its HPF series of hollow shaft gear units. Designed for heavy-duty industrial applications, these advanced gear units offer high torque outputs and flexible installation options, making them ideal for use in demanding environments.