Motion Control – Miniature Voice Coil Motor!

Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and a peak force of 6.5 N (23.3 oz) at a 10% duty cycle. This quiet, clean, non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.

Motion Control –  New, Innovative Products

Maxon introduces standout products for 2023-2024!

Fall River, MA — Motion Control – This year’s Hannover Messe (April 17–21, 2023) featured maxon’s latest product developments, along with new 2023/2024 product catalog with more than 600 pages of drive technology. Standout products include the brand new ECX PRIME 6, and the EC frameless DT motors series’ new sizes 65 and 85.

maxon’s exhibit this year was entirely based around the theme of “more torque and more dynamics in the smallest of spaces.” At its ultra-modern booth, the leading supplier of electric drives and systems gave a first-hand presentation of exciting solutions. The spotlight was on the new ECX PRIME 6: the first size from the new ECX PRIME motor family.

Motion Control – Miniature Linear Focus Actuator

Motion Control – LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

Forestville, CA — Motion Control – Components – Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Long Travel Linear Stages

Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.

Motion Control – Brushed DC Motors

Fall River, MA — Motion Control – maxon DC motors are high-quality DC motors equipped with powerful permanent magnets. The centerpiece of the motor is the globally patented ironless rotor. It offers cutting-edge technology for compact, powerful drives with low inertia. As a result of their low mass moment of inertia, the DC motors feature very high acceleration. The modular and configurable DCX and DC-max programs can be adapted flexibly to the needs of the customer.

DCX Program

High power density, high efficiency, smooth running

and available for online configuration. Configure sizes

from Ø 6 – 35 mm. Choose between precious metal

or graphite brushes, ball or sintered bearings,

and much more.

For product details & specifications: CLICK HERE

Motion Control – Cobot Screw Driving Solutions

Vaughan, Ontario, Canada — Motion Control Components — Electromate Inc., a leading distributor of industrial automation products, motion control systems and robots has announced a new partnership with Spin Robotics, a Danish manufacturer of collaborative robot (cobot) accessories. The partnership will bring Spin Robotics’ screwdriving solutions to the Canadian market, providing customers with efficient and reliable cobot solutions for screwdriving applications.

Motion Control – Metric-High-Precision-Sintered-Bearings

E. Longmeadow, MA – Motion Control – Linear Motion – Available off-the-shelf, cylindrical, self lubricating, sintered bronze bearings from LM76 feature: Very high precision (e.g +2μ to +12μ for 2mm ID bearings), high load capacity (100kg/sq cm), high speed 30,000 rpm) and rapid oscillation capabilities, low/high temperature (-60OC to +230OC), very low coefficient of friction (0.02), and low noise.

These reliable, economic motion control bearings are available in metric sizes (2 mm to 100 mm ID by 2 mm to 120 mm long) and have applications in: Appliances such as washing machines, exercise equipment, portable machine tools, toys, motors, packaging machinery, garden tools and machinery, vibration damping, and automotive equipment such as alternators.

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control –  Open Aperture Linear Focus Actuator

Motion Control – LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg

Forestville, CA, – Motion Control – LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Multi-axis Controllers – Galil Achieves Prestigious Certification!

Vaughan, Ontario, Canada — Multi-axis Controllers – Galil Motion Control, a renowned industry leader in the motion control market, is proud to announce the successful attainment of UL/CSA certification for several of its premier controller series. This milestone exemplifies Galil’s undying commitment to advancing safety, reliability, and quality in the products it delivers to customers globally.

The prestigious certifications attained are UL 61800-5-1/CAN CSA C22.2 No. 274, which governs adjustable speed electrical power drive systems, and UL 61010-1/CAN CSA 22.2 No. 61010-1, which stipulates safety requirements for electrical equipment utilized for measurement, control, and laboratory use.

FDA Compliant – Zirconia Ceramic Radial Bearings

E. Longmeadow, MA — FDA Compliant Radial Bearings – LM76 has announced the release of their new line of Radial Ball Bearings featuring ZrO2 (Zirconia) Ceramic balls.

To Complement LM76’s broad range of Linear Bearings that are FDA/UDSA/3A Dairy compliant, as well as linear bearings for extreme environments; they have added Deep Groove bearings which accommodate radial and axial loads, Angular Contact bearings for simultaneously handling radial and axial loads, Spherical Bearings which are self aligning, and Thrust Bearings for high axial loads. Each of the four types of metric bearings are available in a wide range sizes.

Motion Control Application – Docking System for ISS!

Motion Control Application – The European Space Agency (ESA) is working on a new system to enable easy docking between two spacecraft. maxon developed two special drive systems for this purpose.

Taunton, MA — Motion Control Application – Even though it’s been done many times before, the docking maneuver between two objects in space is always a delicate and potentially dangerous procedure. The speed is extremely high (about 28,000 km/h in case of the ISS), and corrections are difficult. For example, when the two objects are about to meet, maneuvering thrusters can no longer be used, since their exhaust plumes can cause damage. To prevent harm, cargo transporters are caught by a robotic arm installed in the International Space Station (ISS) and berthed manually. Manned spacecraft on the other hand dock directly in a computer-controlled process.

Linear Motion Stage – Miniature Positioning Stage!

Forestville, CA, – — Linear Motion Stage – The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – FDA/USDA/3a Dairy Compliant Products

E. Longmeadow, MA — Motion Control Products – FDA/USDA/3A-Dairy Compliant Motion Control Components – Linear Motion – FOODSTREAM electroless Nickel plated pillow and flange blocks from LM76 are FDA/USDA/3A-Dairy compliant linear motion components.

They complement LM76’s line of FDA compliant bearings, scraper seals, and shafting. FOODSTREAM off-the-shelf pillow and flange blocks are ideal for use in processing and packaging food, producing pharmaceuticals, the BioPharma industry, and in medical devices. Inch size FOODSTREAM pillow blocks are available in single and double length sizes, and as closed or open models in sizes from .5 in. to 1.5 in. Electroless Nickel protects the aluminum base from corrosive liquids, harsh caustic wash down chemicals, and biological fluids.

Motion Control – Ultra-efficient UAV drive with startup Flybotix!

Maxon has collaborated with drone startup Flybotix to develop performance-optimized brushless DC motors for a new kind of inspection drone. With the know-how gained from this and other projects, maxon is making inroads into the new UAV market, where the reliability and quality of components are becoming more important..

Taunton, MA — Motion Control Components Application – Two rotors instead of four was the approach used by startup. Flybotix to develop the ASIO inspection drone, which is set to conquer the market. This indoor drone for industrial facilities is built around a patented drive system powered by brushless DC motors from maxon. maxon worked closely with Flybotix to develop electric motors that are optimized for weight and performance and specifically adapted to this application.

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages.  The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation.  These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

Motion Control – Hybrid Ceramic Ball Linear Bearings

For those times when a Linear Bearing “CANNOT” Fail!

E. Longmeadow, MA –Motion Control – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments, when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added two linear motors to it’s SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. These compact drives with a 1.0 in. (25.4 mm) stroke are just 1.00 in. (25.4 mm) in diameter and 3.75 in. (95.3 mm) long. These direct drive linear motors feature resolutions of 5 µm (0.000197 in.) and 1.25 µm (0.000049 in.) The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible accuracy.

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

Taunton, MA — Motion Control – Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.