September 1st, 2025 
Editor-Publisher 
Solenoids – Van Nuys, CA – Motion Control – The R-09-150 CCWM Series of Counter Clockwise, Forward Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
August 25th, 2025 Editor-Publisher THIS ZERO BACKLASH MINI GEARHEAD IS IDEAL FOR SERVO & STEPPER MOTOR APPLICATIONS
Vaughan, Ontario, Canada — Motion Control – Electromate – Harmonic Drive LLC, a leading provider of precision motion control solutions, is proud to announce the release of its CSF-2XH mini gearhead designed for servo and stepper motors.
August 18th, 2025 Editor-Publisher 
Van Nuys, CA – Linear Motion Actuator – The GVCM-095-064-01 Linear Servo Actuator from Moticont combines high precision and high force in an easily integrated package. This linear voice coil servo actuator, also called a moving coil motor, features: Zero cogging, high speed, high acceleration/deceleration, and high precision accuracy and repeatability when operated in a closed servo loop.
August 11th, 2025 Editor-Publisher 
July 28th, 2025 Editor-Publisher 
Motion Control Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) has released the AT20-30 series of Motorized Vertical Lift Stages featuring sub-micron resolution, very high parallelism and a vertical lift of 30 mm. The AT20-30-01 (pictured) is driven by a Two-Phase Stepper Motor that features a repeatability of 5 microns, positional accuracy of 15 microns and a Full Step resolution of 0.2 microns! This stepper motor driven stage also has a knob on the motor for manual adjustment.
July 21st, 2025 Editor-Publisher
Motion Control – Van Nuys, CA – The S-08-54 Series of Low-Profile Pull Type Clapper Solenoids from Magnetic Sensor Systems (MSS) are just 0.54 in (13.8mm). in diameter and 0.80 in (20.3mm). long and the overall extended length is 1.08 in (27.4mm).
July 21st, 2025 Editor-Publisher 
Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.
The S-18-100 Series solenoids are 1.000 in. wide x 0.84 in. high x 1.74 long and have a 1.00 stroke. The noncaptive plunger or actuator is 0.312 in. in diameter with a clevis end for load attachment.
July 14th, 2025 Editor-Publisher 
Electromate – Vaughan, Ontario, Canada — Motion Control – Components — Introducing Dual Absolute encoder versions of the FHA-C mini actuator. Featuring BiSS-C Harmonic Drive fha-24v-002bi-directional communication for both encoders. The dual encoders are incorporated in essentially the same package size as the long-standing FHA-C mini single incremental encoder version. Without increasing the size, the dual absolute encoder offers single turn absolute position at the output, without the need for battery back-up. Panel mount connectors come standard, and customers can choose between 4 exit options.
July 7th, 2025 Editor-Publisher 
Motion Control – Van Nuys, CA – The LVCM-013-019-02M (Metric version) and the LVCM-013-019-02 (Imperial version) Linear Voice Coil Motors, just 12.7 mm (0.500 in.) in diameter, have been released by Moticont. Miniature brushless, efficient, high speed linear servo motors (known as Voice Coil and Moving Coil Motors) have a 12.7 mm (0.5 in) long stroke, a high-force-to-size ratio of 0.81 N (2.9 oz) and a peak force of 2.55 N (9.2 oz) at 10% duty cycle.
June 30th, 2025 Editor-Publisher 
E. Longmeadow, MA — Motion Control – Linear Motion Bearings – FDA/USDA/3A compliant bearings, Seals, Shafting, and Pillow Blocks are available from LM76.
LM76 Fluidline BearingsTM are long wearing thermoplastic polyester self lubricating, low coefficient of friction, light weight linear bearings. Available off-the-shelf in standard closed inch sizes (closed metric sizes are available on request) these bearings drop-in replacements for standard linear bearings. They are highly resistant to wash-down chemicals and high energy radiation such as gamma and x-rays.
June 16th, 2025 Editor-Publisher 
Motion Control – Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has added two Stainless Steel Electroless Nickel plated Linear Single-axis Stages to their extensive line of high resolution stages. The AX40-F1VR-ND and the AX40-F1VL-ND Linear (X-axis) Stages have a 40 mm (1.575 in.) by 40 mm (1.575 in.) table and a stroke length of 15 mm (0.590 in.).
June 9th, 2025 Editor-Publisher
Motion Control – Van Nuys, CA – A series of 1.250 in. diameter tubular solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 1.00 inch, the S-20-125 series of Pull Type Tubular Solenoids feature 18 different solenoids with 23 AWG to 40 AWG (American Wire Gauge) windings. This broad range of solenoids allows the user to select the best solenoid for an application based on the force, stroke length, voltage, and duty cycle requirements. If needed, MSS solenoids with higher temperature class coil and lead wire insulation can be specified.
June 2nd, 2025 Editor-Publisher 
Motion Control – Toronto, Canada – Electromate, Canada’s exclusive distributor of Maxon, is proud to introduce the ESCON2 servo controller—a next-generation motion control solution delivering unmatched power density, precision, and versatility for industrial and robotic applications.
May 26th, 2025 Editor-Publisher 
Motion Control – Van Nuys, CA –The GVCM-032-025-02M Linear Voice Coil Servo Motor, is the first of a new series, released by Moticont.
May 19th, 2025 Editor-Publisher 
Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.
May 5th, 2025 Editor-Publisher
Motion Control – Video – The integration of high precision Rotary and Goniometer Stages creates platforms for the precise measurement of curves and angles. The YP100-45 Series (-01 thru -04) of Dual-axis Stages has been released by Optimal Engineering Systems, Inc. (OES). These compact, Yaw Pitch Stages features high precision rotary stages capable of 360 degrees of continuous rotation (clockwise/counterclockwise) and goniometers with +/45 degrees of travel. The table of the goniometer (upper) measures 104 mm x 90 mm with a precision pattern of threaded holes for tooling and fixtures. The YP100-45 Series Dual-axis stages are on a mounting plate for easy integration into new and existing applications.
April 28th, 2025 Editor-Publisher
Motion Control – Van Nuys, CA – Magnetic Sensor Systems (MSS) has released the S-63-38-H Series of Push Type Tubular Solenoids. These miniature 0.38 in. diameter solenoids can be used as a push type solenoid at the push end or a pull type solenoid at the pull end and features 16 standard off-the-shelf options to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
April 21st, 2025 Editor-Publisher 
Vaughan, Ontario, Canada — Motion Control – The FlexPro® drive series is AMC’s latest family of digital servo drives designed for high power, small size, and reliable servo motor control. The drive architecture allows for higher power densities while still maintaining reliability and versatility. The advanced processing and storage capabilities ensure that the drives are more intelligent and operationally flexible than ever before
April 14th, 2025 Editor-Publisher 
Motion Control – Van Nuys, CA – Moticont has added the SDLM-016-032-01-01-M (Metric) Direct Drive Linear Motor with an integrated encoder and temperature sensor to their SDLM Series of Metric and Imperial dimensioned high precision linear actuators.
April 7th, 2025 Editor-Publisher 
E. Longmeadow, MA –Motion Control – SAIBO is one of world recognized manufacturers of precision power transmission components. SAIBO group has two divisions, linear motion division and bearing division. Linear Product Division mainly produces curved rail and conveyor, telescopic rail and fork, linear guide, linear module, belt conveyor etc. Bearing Division mainly produces Thin-section bearing, High-speed angular contact ball bearing, linear bearing etc.