Motion Control – Motion Controllers for Servos and Steppers!

Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one to four axes of motion for users without prior motion control experience. These MCC controllers integrate a motion control card and operator interface in one package. Having a user-friendly interface, they allow the user to operate the motion controller, without the need for a PC, PLC, host controller, or programming.

The modes of operations are: Set Acceleration, Set Velocity, Set Position, Absolute Move, Relative Move, Find Home, Reset Position Counter, Go to Position Zero, Joystick Operation and Stop All Motors. The MCC Controllers feature a 4-Line LCD, 32-button keypad, STEP and DIRECTION outputs for each axis.

Motion Control – Maxon Application!

In 2022, Olympic silver medalist Mathias Flückiger rides for the Thömus-maxon cross-country racing team.

Taunton, MA — Motion Control Products – Swiss bicycle manufacturer Thömus and drive specialist maxon are entering into a partnership in cross-country cycling. As part of this cooperation, maxon is providing its e-bike platform to Thömus as the basis for an electric mountain bike for World Cup training. They also plan to make this bike available to the retail trade in the future.

Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

E. Longmeadow, MA Motion — Control Components – Linear Motion – FDA/USDA/3A-Dairy compliant, Water Dog Sliders from LM76 feature Corro-SlickTM coated 300 series stainless steel rails and contoured WDX Polymer blocks. Water Dog Sliders can be washed down with the most aggressive chemicals and caustic foaming agents and have an operating temperature range of – 400O to +180 OF. Quiet, low maintenance Water Dog Sliders can be used: Dry, submerged in liquids, and in refrigerated and frozen environments.

Motion Control – Electric Cylinder

Van Nuys, CA – Motion control – New, patent-pending, SDLM-051 direct drive linear motors with built-in encoder from Moticont eliminate backlash and provide users with high acceleration, high speed, high resolution, and long life. Available in several off-the-shelf models, these direct drive linear motors feature resolutions of 5.2 µm (0.000206 in.), 1.25 µm (0.000049 in), and sub micron resolution. Compact, only 2 in. (50.8 mm) in diameter and 3.75 in (95.3 mm) long, and with the linear optical quadrature encoder inside directly connected to the shaft for the great-est possible accuracy, these motors can be easily integrated into new and existing applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.

Motion Control – Servo Drives

This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more … 

Vaughan, Ontario, Canada — Motion Control Components — This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more. Safe Torque Off (STO) functionality is included as a standard feature. Available now, these new models offer high efficiency in a compact design and are targeted towards AGVs and mobile applications.

Motion Control – Pick & Hold Solenoids

Van Nuys, CA – — Motion Control – A compact, PWM, high performance Pick-and-Hold Solenoid Driver Module, the PH-ET series from Optimal Engineering Systems, Inc. (OES) is designed to energize one or two solenoids independently. It avoids overheating of the energized solenoid coils even for indefinite hold times.

Motion Control – Miniature Brushless DC motor, Gearhead, Encoder

With the ENX EASY, maxon motor’s NEW ENX EASY is a sterilizable encoder for use with maxon’s brushless DC motors. This opens up a range of new possibilities in medical technology.

Fall River, MA — Motion Control Components – This is the world’s first steam sterilizable encoder ENX EASY. It is available in an incremental (1024 counts) and absolute version (4096 steps), both designed for 1,000 autoclave cycles.

Motion Control – USDA/FDA/3A-Dairy Compliant Linear Motion Components

LM76 offers Metric FDA/USDA/3A-Dairy compliant self-lubricating linear bearings for: Food Processing, Packaging, Bio/Pharmaceutical, and Medical Systems!

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – Mecademic Robotics releases new firmware!

Vaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control – Vertical Rotary Stage

Van Nuys, CA – — Motion Control – The precision AR59-AV Motorized, 30 mm Clear Aperture Vertical Rotation Stage from Optimal Engineering Systems, Inc. (OES) features a 180:1 precision worm drive and deep grove ball bearings for a high resolution of ± 0.001O when microstepping (10 micro steps-per-step). The parallelism of the table is less than 50µm. The AR59-AV vertical rotation stage is ideal for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining or scribing, electronic assembly, testing, and photonics.

Motion Control – Planetary Gearbox for Robotics

Patented design guarantees that backlash will not increase over the life time of the gearbox

Vaughan, Ontario, Canada — Motion Control Components — The GPL-V (shaft) and GPL-H (hollow) are our lowest backlash (≤ 0.1 arc minute ) planetary gearboxes for horizontal and vertical robotic applications. A patented design guarantees that the backlash will not increase over the life time of the gearbox. Very high tilting rigidity results in excellent positioning accuracy with a rated 20,000 hours which is over 3x longer than comparable gearboxes in the market.

The noise level of 65dB compared to 69dB of comparable models makes it ideal for MRI applications where low noise levels are critical.

The efficiency is over 90% compared to 70 – 80% of other models allowing for lower power consumption which could result in choosing a smaller motor.

Motion Control – Hollow Core Voice Coil Motor

Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).

The hollow core allows for optics, illumination, laser beams, or cables to pass through.

Motion Control – Electric Cylinder

Vaughan, Ontario, Canada — Motion Control Components — Introducing the 35mm diameter CBL35C electric cylinder with built-in controller from SMAC Corporation. With its built-in controller, the CBL35C controls force, position and velocity and features simple installation.

With outer diameters of only 43mm to 90 mm, these frameless brushless servo motors are extremely compact.

Ideal for applications with limited space but requiring accurate control, the CBL35C provides significantly longer life, programmability, high speed, accuracy, and energy efficiency while remaining price-competitive.

Motion Control – Elevator Stages

Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively.

The vertical motion of each Z-Axis Stage is driven by an 8 mm diameter ball screw with a 1 mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns makes these two Z-Axis Stages ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control -Application – Flat Motors

Motion Control – For paraplegic people, rehabilitation is frequently a long process; this is why methods and tech-nology that optimize these measures for the patient are so important. At the Bern University of Applied Sciences, many years of research has led to the development of a recumbent trike with electrical stimulation. The patient’s movements are supported by a maxon flat motor.

Taunton, MA — Motion Control Products – Cycling with a recumbent trike can partially restore lost motor functions of patients with spinal cord lesions. Furthermore, it provides the patients with a very practical and successful basis for cardiopulmonary and muscular training units. The paralyzed leg muscles are reactivated by means of functional electric stimulation (FES) combined with controlled training.

Motion Control – Rotary Stage

Van Nuys, CA – — Motion Control – The new AY110-300 Motorized Rotary Stage from Optimal Engineering Systems, Inc. (OES) features a large 180 mm (7.087 in.) open aperture. This precision, large open aperture (hollow core), low profile stage is just 65 mm (2.559 in.) high and it’s foot print is only 303 mm by 319 mm (11.929 in. by 12.559 in.) not including the motor. The rotary table of the stage has a precise pattern of threaded holes for mounting custom tooling and fixtures, and holes in the base for easy integration into new and existing applications. The diameter of the rotary table is 300 mm (11.811 in.) and the range of travel is a full 360o, and it is capable of continuous rotation.

Motion Control – Ceramic Linear-Bearings

Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.

Motion Control – Planetary Gearbox

Motion Control Components – The SPH inline planetary gearbox available from Electromate is GAM’s latest solution for today’s demanding motion control challenges! 

Vaughan, Ontario, Canada — Motion Control Components — It is available in six frame sizes with nominal torque ratings from 15 to up to 900Nm. The SPH features precision cut helical gears that are ground for smoothness, quiet operation, and high accuracies.

The face width of the SPH gears are up to 70% longer than the gears in comparable gearboxes on the market, which means more tooth contact and greater overall torque density. To carry the higher torques, SPH gears are case hardened which imparts strength deeper into the gear compared to nitriding which hardens just the surface. With several output configurations available, machine integration is simplified.

Motion Control – Open Aperture Voice Coil Motor

Van Nuys, CA – Motion Control – Low inertia hollow core voice coil or moving coil linear motors from Moticont feature high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. The cleanroom friendly, non-commutated motors are available in 23 off-the-shelf standard sizes, Moticont hollow core voice coil linear motors have open apertures of 0.125 in. (3.2 mm) to 2.000 in. (50.8 mm).