Category Archives: XY Stages

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.

Motion Control – Low Profile XY Brushless Linear Motor Positioning Stage from H2W Technologies

Motion Control – Low Profile XY Linear Motor Positioning Stage

motion control - custom stages


motion control - h2wSanta Clarita, CA —– Motion Control – The
SRS-004-006/004-003-01-XY is a low profile XY single rail positioning stage that uses brushless linear motors to generate a continuous/peak force of 6.2 lbs [27.8 N]/18.7 lbs [83.3 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 4.3 in [109 mm] (bottom axis), 4.3 in [109 mm] (top axis). The top axis is able to directly mount to the moving bottom axis motor. This helps reduce the overall height and moving mass of the system.

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Motion Control – Dual Feedback Voice Coil Positioning System!

Motion Control – Positioning Stage
motion control voice coil positioning stage


motion control - h2w

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies’ latest custom voice coil positioning stage (VCS08-350-LB-01-MC-F) was developed to meet the dual feedback requirements of the customer. This closed loop system allowed the user to monitor both position and force simultaneously and adjust accordingly. It incorporates a voice coil motor (NCC08-34-350-2X) which generates a continuous/peak force of 35.0 lbs [156 N]/105 lbs [467 N] with a total stroke length of 0.80 in [20.3 mm].

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

Motion Control – LM76 Expands Custom Manufacturing Capabilities!

 

Motion Control - Custom Linear Motion Components and Complete Systems

motion control - custom components

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Motion Control – Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!

Motion Control – Hollow Core Voice Coil Stage

motion control voice coil stage

 

MotiCont-Logo

Van Nuys, CA – Motion Control – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively. These precision stages allow the user to select the level of precision needed for an application.

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings. Each of these stages has a 0.97 in. (24.6 mm) range of motion with 6.3 lb. (28.2 N) of continuous force and 20.0 lb (89.9 N) peak force. These brushless, clean, quiet, efficient, low inertia, high acceleration, zero cogging and high speed voice coil driven stages have a built-in home switch for accurate initialization. As the coil is fixed and the magnetic assembly moves, there are no moving electrical components to fail. Designed for closed loop servo operation an integral quadrature optical encoder with differential outputs is included..

The stages’ 1.509 in (38.3 mm) x 2.000 in. (50.8 mm) tables are equipped with 4 8-32UNC-28 mounting holes. Pre-drilled and counter-bored mounting holes in the base of the stages and a plug -and-play wired connector allows for easy integration into new or existing applications. These black anodized voice coil stages with a 0.500 in (12.7 mm) clear aperture are ideal for: Laser drilling and machining, optical focusing, testing, laser steering, mirror positioning, scanning, oscillation, switching, as well as precision applications in industrial, medical, metrology, and research fields.

The HCDS-051-032-013-01-B1-01 and HCDS-051-032-013-01-B1-30, Voice Coil stages are also available in XY or XYZ configurations, and can also be ordered as a complete plug-and-play system with a controller. Please consult our engineers if your application requires others parameters such as: Range of motion, continuous or peak force, and multi axis configurations.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – High Load, Low Profile XY Stage Features High Resolution and High Repeatability Is Available from OES!

Motion Control – XY High Resolution Stage

Motion Control Low Profile XY Stage

OES Logo

Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, larger, high load, precision stage to it’s extensive line of precision XY stages. The AU200-170×170 stage is a low profile stage measuring just 108 mm (2.252 in) high with a compact footprint (including the motors) of 458.5 mm x 458.5 mm (18.032 in.) The linear travel of the X and Y axes is 170mm x 170mm (6.692 in.), and the resolution of each axis is 20 microns (non-micro-step) or 1 micron (20 micro-steps per step motor driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns. The 4 mm per-turn lead screws have just 2 microns of backlash and the stages have preloaded V-groove and crossed roller bearings contributing to the high precision and stiffness of the AU200-170×170 Stage. Designed for applications such as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications, this compact, low profile black anodized aluminum XY stage is easy to integrate into new or existing systems.

The XY stage’s table measures 300 mm x 300 mm (11.8 in x 11.8 in.) and features a precision pattern of drilled and threaded mounting holes to facilitate the addition of tooling or fixtures. Additionally a table with a large open aperture is also available.

The standard two-phase (1.8o) stepper motors have knobs for manual adjustments of each axis of the stage, however, the knobs can be replaced with incremental encoders for position verification or closed loop operation. As an option, servo motors and compatible motion controllers are also available from OES, or the AU200-170×170 Stage can be ordered as a complete plug-and-play motion control system.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

For other Motion Control Components, Applications, and Technology from OES (Optimal Engineering Systems) go to: http://MotionControlWeb.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – New High Precision, Low Profile XY Open Aperture Stage Features 1 Micron Resolution and 2 Micron Repeatability!

motion control open aperture xy stage

 

OES Logo

Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, high precision open aperture stage to it’s expanding line of precision XY stages. The AU200-100×100 stage is a low profile stage measuring just 80 mm (3.150 in.) high with a compact footprint (including the motors) of 348 mm x 348 mm (13.701 in. x 13.701 in.) The linear travel of the X and Y axes is 100mm x 100mm (3.937 in. x 3.937 in.), and the resolution of each axis is 20 microns (non-micro-step) or 1 micron (20 micro-steps per step motor driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns. The stages have preloaded V-groove and crossed roller bearings and ground 4 mm per-turn lead screws having just 2 microns of backlash, all contributing to the high precision and stiffness of the AU200-100×100 Stage. Designed for applications such as: Laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, alignment, assembly, and optical applications, this compact, low profile black anodized aluminum XY stage is easy to integrate into new or existing systems.

The XY stage’s table measures 300 mm x 300 mm (11.811 in x 11.811 in.) and the open aperture measures 188 mm x 188 mm (7.402 in. x 7.402 in.). A recessed mounting and precision pattern of drilled and threaded mounting holes facilitate the alignment of tooling or fixtures. Additionally, solid tooling plates are available for custom and interchangeable applications.

The standard two-phase (1.8 degree) stepper motors have knobs for manual adjustments of each axis of the stage, however, the knobs can be replaced with incremental encoders for position verification. As an option, servo motors and compatible motion controllers are also available from OES, or the AU200-100×100 Stage can be ordered as a complete plug-and-play motion control system.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Low Profile XY Voice Coil Positioning Stage

motion control linear stage

 

H2W Logo

Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system. The voice coil stage (VCS06-010-BS-01-MXY) is a closed loop positioning system that can be used for positioning applications. The stage utilizes a custom low-profile design that utilizes a unique electromagnetic circuit design. The motor has a two-axis planar coil assembly that interacts with a common magnetic circuit. This circuit design allows for a minimal overall height of 2.085 inches [53 mm]. Each axis has a 0.62″ [15.8 mm] stroke; generate 0.75 lbs [3.3 N] of continuous force and 2.25 lbs [10 N] of peak force.

Each axis is guided by precision linear ball slide assemblies. It includes a one-micron resolution magnetic linear encoder on each axis. This design utilizes a moving coil, which has a lower moving mass that enables the highest possible acceleration. Voice coil positioning stages are ideal for applications that require quick, short moves with fast settling times.

Features:

  • – Low-profile
  • – Two-axis motion control
  • – High acceleration
  • – Compact footprint
  • – Custom strokes and force configurations available

 

About H2W Technologies, Inc.

H2W Technologies is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages. Other motion control products include: limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control requirements.

See Article: http://www.h2wtech.com/article/dual-axis-closed-loop-linear-stepper-stage

See Video at Youtube: https://youtu.be/kEOt0BDd7hE

See Product: http://www.h2wtech.com/product/linear-stepper-stages/LSS-012-12-060-XY-01A-M”

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

 

For other Motion Control Components, Applications, and Technology from H2W Technologies visit: http://Automation-Blogger.com

Motion Control – High Speed, High Precision, Dual Axis Positioning Stage from H2W Tech

H2W Technologies High Speed Dual Axis LSS Positioning System

H2W Logo

Santa Clarita, CA —– Motion Control – Linear Motion – The high speed, high precision LSS-012-12-060-XY-01A-M dual axis, low profile linear stepper positioning stage generates a force of 6.0 lbs [26.7 N] with a total stroke length of 12.5 in. [318mm] for each axis. This compact, low profile dual axis stage measures 17.0 in. x 19.0 in. [432 mm x 483 mm] and is just 4.2 in. [108 mm] high. Featuring repeatability of ±0.0004. in [±10 microns] and accuracy of ±0.0007 in/ft [±58 micron/meter], this dual axis linear stage is ideal for: Assembly, testing, metrology, scanning, laser cutting, and plotting in industrial, laboratory, and medical applications.

This XY axis linear stage also features high speed and high acceleration, and can be mounted horizontally or vertically. For precision closed loop operation, H2W integrates a 1.0-micron absolute linear encoder and linear stepper motor, running it as a 2-phase brushless linear motor. Additionally, using absolute encoders eliminates the need for the stages to return to a home position.

Other features include: High-flex power cables in a cable carrier with room for additional cables. This stage is available with a complete plug-and-play electronics package and custom mounting holes in the base and top stage for easy integration into new or existing applications.

About H2W Technologies, Inc

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

See Article: http://www.h2wtech.com/article/dual-axis-closed-loop-linear-stepper-stage

See Video at Youtube: https://youtu.be/kEOt0BDd7hE

See Product: http://www.h2wtech.com/product/linear-stepper-stages/LSS-012-12-060-XY-01A-M”

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube

Motion Control – Dual Axis Linear Motion Stepper Motors!

H2W Technologies Dual Axis Air Bearing Stepper Stage

H2W Logo

Santa Clarita, CA — Automation Motion Control – Linear Motion — H2W Technologies’ dual axis linear motion stepper motors are ideal for open loop positioning applications requiring 2 axis of motion in a single plane. They can perform at speeds of up to 80 in/sec [2 m/sec] and strokes of up to 20 in x 30 in [0.5 m x 0.75 m]. Linear stepper motors are capable of very precise position, velocity, and acceleration control when coupled with a micro-stepping drive and indexer.

The moving assembly called the “forcer” is supported by magnetically preloaded air bearings that are imbedded in the active surface of the forcer. The bearings are designed to support the customer’s payload and to maintain the required 0.0005 in to 0.0010 in [12 to 25 micron] gap between the platen and the forcer.

The step and direction signal for each linear motion axis comes from two separate micro-stepping drives (2 or 4 phase). A 2 axis indexer is required to send step and direction signals to the drivers. For 2 phase motors, the full step is 0.010 in [250 microns] and for 4 phase motors the full step is 0.005 in [125 microns]. With micro-stepping, resolutions in the order of 0.5 to 1 micron are achievable.

The dual axis linear stepper motor is a complete 2 axis, single plane air bearing positioning system with the motor, the bearings, and the positioning system all built into one compact package. Integrating linear encoders with the stepper motor allows for a hybrid, closed loop positioning system.

Advantages:

  • Low profile and small cross section
  • High Speed
  • No servo tuning required
  • Multiple forcers on a single platen

Applications:

  • Pick and Place
  • Wire bonders
  • Parts transfer
  • Fiber optic

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail:info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube

Motion Control – XY Stage with Internal Motor and Controller from Steinmeyer!

Motion Control – Linear Motion Stage
Steinmeyer KT210 dual axis -Linear Motor Driven Stage


Worburn, MA – Motion Control – Steinmeyer, Inc. announced a new addition to its line of precision linear stage systems. The new model KT210-EDLM offers a sleek compact design with a height of only 50 mm and length and width of 210 mm. Travel is 100 x 100 mm and includes custom designed low profile direct drive ironless linear motors. A key feature of this stage is that all motors, cable carriers and controller are integrated inside the unit, making this ideal for space saving motion applications. Additionally, due to the integrated controller, all electronics including motor drives are packaged completely inside; communication is simple though a universal USB interface.

Relevant specifications for the KT210-EDLM stage include:

• Travel: 100 mm x 100 mm

• Accuracy: +/- 13.6 µm (micron)

• Repeatability: +/- 2.7 µm

• Linear runout: +/- 4 µm

Features for the integrated controller include:

•Point to point motion standard (contouring optional)

•Programming in steps

•1 each external input and output

•Communication via USB or RS232

•Full digital drives

This stage is ideal for applications such as:

• Life Sciences

• Semiconductor

• Fiber Optics

• Micro-manfuacturing

The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.

Contact Steinmeyer for further information on their extensive product portfolio:

781-273-6220

infoUSA@steinmeyer.com

Visit steinmeyer.com/

Visit our Website
Order Our Catalog
Steinmeyer Motion Control Videos
Other Steinmeyer Motion Control Ball Screw Blog

Motion Control – High Force Air Bearing XY Voice Coil Positioning Stage

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other linear motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel:888-702-0540, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
You Tube