Category Archives: Stepper Motor Drive

Motion Control – Low Profile XY Brushless Linear Motor Positioning Stage from H2W Technologies

Motion Control – Low Profile XY Linear Motor Positioning Stage

motion control - custom stages


motion control - h2wSanta Clarita, CA —– Motion Control – The
SRS-004-006/004-003-01-XY is a low profile XY single rail positioning stage that uses brushless linear motors to generate a continuous/peak force of 6.2 lbs [27.8 N]/18.7 lbs [83.3 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 4.3 in [109 mm] (bottom axis), 4.3 in [109 mm] (top axis). The top axis is able to directly mount to the moving bottom axis motor. This helps reduce the overall height and moving mass of the system.

Motion Control – AMC’s STAC6-Q-H – Advanced Step Motor Drive for Hazardous Locations

Electromate offers AMC-STAC6-Q-H-Stepper Drive

Motion Control - Electromate-Logo

 

The Only Internationally Certified Hazardous Location Stepper Drive Available

 

Vaughan, Ontario, Canada — Motion Control Components – The STAC6 offers best-in-class anti-resonance that ensures optimal performance of the step motor over the widest speed range. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving the highest torque NEMA 34 and 42 frame step motors on the market.

Features include:

  • ATEX and IECEx certified for Class I, Zone 2 locations
  • UL certified for Class 1, Div 2, Group C & D locations
  • HazLoc Step Motor Drive
  • HazLoc certified for USA, Canada, Europe and Middle East
  • Advanced anti-resonance algorithm
  • Torque ripple smoothing
  • Microstepping to 51,200 steps/rev
  • Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
  • Designed for use with high quality NEMA 23, 24, 34 and 42 frame step motors
  • 7 digital inputs, 3 digital outputs, all optically isolated
  • 2 analog inputs, +/-10 volt range
  • Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
  • Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
  • Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
  • Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
  • Output Current: 0.5-6.0 A/phase, peak-of-sine
  • Communication Ports: RS-232, RS-485
  • Idle Current Reduction: 0-100%
  • Setup Method: Software setup
  • Dimensions: 6.35 x 4.66 x 2.31 inches
  • Weight: 32 oz.
  • Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
  • Ambient Humidity: 90% max, non-condensing

CLICK HERE to view more information on the STAC6-Q-H Advanced Step Motor Drive for Hazardous Locations from Applied Motion Products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link