Category Archives: Stages – X axis and Rotary

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

motion control- xy stages

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

motion control - OES

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!

Motion Control – Joysticks

motion control - Joystick
Van Nuys, CA – — OES (Optimal Engineering Systems, Inc.) has expanded its line of Joysticks for 1, 2 and 3 axis Stages and Actuators. These are easy to use, single-handed, ergonomic joysticks that provide proportional control of the X, Y, and Z axis of from one to three actuators. Low, medium, and high speed ranges are button selectable. The X, Y, and Z axis speeds are controlled by the tilt angle of the handle and the angle of rotation of the knob.

motion control - stages - custom

The maximum speeds may be set by the user via the supplied, easy to use GUI.

Motion Control – Optimal Engineering Systems, Inc. (OES) Introduces New, Motorized, High Resolution Pan-Tilt Stages!

Motion Control – Pan-Tilt Stage
motion control pan tilt stage

Van Nuys, CA – — Motion Control – High Resolution, Motorized, Pan-Tilt Stages have been added to the extensive line of OES (Optimal Engineering Systems, Inc.) motion control products. These motorized Pan-Tilt Stages are available in two sizes. The PT60-1 Pan-Tilt Stage is a combination of two 60 mm (2.362 in.) rotary stages and the PT100-1 is a combination of two 100 mm (3.937 in.) rotary stages, set at a 90O angle to each other.
motion control - oes
The rotary stages of each Pan-Tilt stage features a high repeatability of 0.005O (18 arc-sec), a positional accuracy of 0.005O (18 arc-sec), and a resolution of 0.001O = 3.6” (10 Micro-steps per Step Motor Driver in use).

Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!

Motion Control –  Triple-Axis Stage!

motion control - tri-axis stages


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions.

The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a single-axis linear actuator. The Beta-axis has a travel range of +/- 15 degrees with a rotation height of 50 +/- 0.2 mm.

Motion Control – Dual Feedback Voice Coil Positioning System!

Motion Control – Positioning Stage
motion control voice coil positioning stage


motion control - h2w

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies’ latest custom voice coil positioning stage (VCS08-350-LB-01-MC-F) was developed to meet the dual feedback requirements of the customer. This closed loop system allowed the user to monitor both position and force simultaneously and adjust accordingly. It incorporates a voice coil motor (NCC08-34-350-2X) which generates a continuous/peak force of 35.0 lbs [156 N]/105 lbs [467 N] with a total stroke length of 0.80 in [20.3 mm].

Motion Control – Two Axis X-Theta Positioning System from H2W Technologies

Motion Control – Two Axis X-Theta Positioning System

motion control - two axis stage

 

Santa Clarita, CA —– Motion Control – The SRT-030/360-026-01 is a two axis X-Theta positioning system ideal for precision motion control applications that require coordinated linear and rotary positioning. The 2 axis system consists of a rotary DC servo motor with encoder mounted to a moving brushless linear motor driven positioning stage.

motion control- h2w
The linear axis uses an H2W brushless linear motor BLDM-C08 to generate a continuous force of 26 lb [115.5 N] and a peak force of 78 lb [347 N] with a stroke length of 30 in [768 mm]. The non-contact 1 micron resolution linear encoder allows for precise positioning along the linear axis. It is guided by a pair of precision recirculating linear ball bearings.

The rotary axis consists of a standard 34-frame rotary servo motor with a 10,000 counts/rev resolution encoder. The motor can generate a continuous torque of 29 lb-in [3.3 N-m] and a peak torque of 87 lb-in [9.9 N-m]. The rotary axis is removable, which allows for higher accelerations by reducing the moving mass of the linear axis.

The system can be oriented in any orientation. There are also provisions that allow customer cables to be routed within the cable carrier. The system has a reference mark, end of travel limit switches and hard stops.

Features:

  • – Combined linear and rotary displacement 
  • – Two axis of coordinated motion 
  • – Rotary axis is capable of full 360-degree rotation 
  • – Rotary axis can be easily removed if needed 
  • – Cable carrier to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W YouTube Channel

H2W Technologies Blog

motion control- h2w