Category Archives: Stages – X

Motion Control – the LFA-3403 Is an Open Apeture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Vacuum Compatible Voice Coil Positioning Stage from H2W Technologies

Motion Control – Vacuum Compatible Voice Coil Positioning Stagemotion control - vacuum compatabile

motion control- h2w

 

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies designed a voice coil positioning stage (VCS05-060-VBS-V0005AR) to operate in the vacuum of space, using our voice coil motor (NCC05-18-060-2X) to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.7mm]. The absolute 0.05-micron (50-nano meter) resolution encoder is suitable for very high precision applications.

Motion Control – NEW! High Speed Integrated Bearing and Drive System Features +/- 5 Microm Repeatability!

Motion Control – High Speed Integrated Bearing and Drive System

motion control - high speed drive system

E. Longmeadow, MA –Motion Control – LM76 is the Exclusive North American Distributor of a new high speed integrated bearing and drive system featuring +/- 5 micron repeatability, and zero backlash! This new X-Axis BE125-10 Open Screw Drive System sets new standards for: Length of travel, speed, and precision for Cartesian Robots (robots that move in X,Y and Z axes according to Cartesian Coordinates also know as rectangular coordinates) and single axis linear stages!

motion control - linear bearings

The new X-Axis BE125-10 Open Screw Drive System is a compact linear stage measuring 125 mm (4.921 in.) wide x 86 mm (3.386 in.) high x 4391 mm (172.874 in.) long and can handle dynamic loads to 500 kg (1102 lbs). The standard stroke length is 4000 mm (157.480 in.) and custom stroke lengths to 10 m (32.8 ft) can be specified.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Positioning Stage!

motion control - miniature stepper motor stage


motion control - Miniature actuatorsForestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – Low Profile XYZ Force Positioning System from H2W Technologies!

Motion Control – Low Profile XYZ Positioning Stage

motion control - xyz stage
motion control- h2w
Santa Clarita, CA —– Motion Control – This compact closed loop system was designed to satisfy the customers dual feedback requirements. This allows for simultaneous position and force monitoring which can adjust accordingly in three axis of motion (XYZ). It was designed to operate in an inverted orientation. This low profile XYZ-Force positioning stage design is comprised of a SRS-002-003/002-003-01-XY single rail positioning stage (horizontal XY-axis) with a mounted VMS06-008-LB-01 voice coil positioning stage (vertical Z-axis).

Motion Control – XZ-Axis Motorized Linear Positioning Stages feature 1 Micron Repeatability from Optimal Engineering Systems, Inc. (OES)!

Motion Control – XZ-Axis  Positioning Stages

motion control - XZ stage

motion control -oes

 

 

 

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear Positioning Stages features 1 micron repeatability and 10 micron positional accuracy. Both the X-axis (horizontal axis) and the Z-axis (vertical axis) have the travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm and even longer to meet your application requirements.

Motion Control – Vacuum Compatible Voice Coil Positioning Stage from H2W Technologies

Motion Control – Vacuum Compatible Voice Coil Positioning Stagemotion control - h2w vc stage

motion control- h2w

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies designed a voice coil positioning stage (VCS05-060-VBS-V0005AR) to operate in the vacuum of space, using our voice coil motor (NCC05-18-060-2X) to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.7mm]. The absolute 0.05-micron (50-nano meter) resolution encoder is suitable for very high precision applications.

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control –  XYZ Axis Stages to Suit  Specific Applications!

motion control - custom stages

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

motion control - stages - custom

The two-phase stepper motors are standard with a knob for manual adjustment. The knob can be replaced with an incremental quadrature encoder for position verification. An optional three-phase brushless servo motor with optical encoder is also offered for closed loop operation and higher operating speeds. The standard pitch of the lead screw is 4 mm that can be replaced with1 mm per turn lead screw for higher resolution.