Category Archives: Motors – Integrated

Motion Control – Vacuum Compatible Voice Coil Actuator with Integrated Thermal Sensor

Motion Control – Vacuum Compatible Voice Coil Actuator

motion control -linear actuator


motion control- h2wSanta Clarita, CA —– Motion Control – H2W Technologies, Inc. has designed and manufactured a non-commutated DC actuator, otherwise known as a
voice coil actuator, designed for vacuum operation in a cryogenic environment. H2W has worked with several aerospace customers, developing manufacturing processes and material selection to provide customers with the ability to design motors with low-outgassing in UHV conditions, which meet NASA’s Collected Volatile Condensable Materials and Total Mass Loss requirements.

Motion Control – maxon celebrates International Women in Engineering Day!

Motion Control – maxon celebrates International Women in Engineering Day!

The women in engineering (WIE) at maxon work eagerly to contribute to the success of advanced technology in the motion control industry. This week in honor of International Women in Engineering Day, June 23, 2021 – maxon wishes to thank these engineering women for their contributions as they continue to help shape the world we live in.

motion control - engineers


motion control - maxon motorsTaunton, MA — Around the globe, the maxon women in engineering are working on motion control applications with their customers, they focus on new product designs to implement the latest technologies and continue to research new concepts and ideas for drive systems to be used in motion control applications found in Medical, Industrial Automation, Aerospace and Defense, and Mobility industries.

Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!

Motion Control Application – Motors

They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.

motion contyrol - motor application


motion control - maxonTaunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.

Motion Control – Maxon precision motors Go to Mars AGAIN!

Motion Control – Maxon motors on Mars!

motion control - miniature motors

 

motion control - maxon logo

 

 

Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.

Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.

Motion Control Components – Maxon’s New IDX Integrated Servo Motor – Power at the Press of a Button!

motion control - electromateMotion Control – Integrated Servo Motor

motion control - integrated Servo Motor


Vaughan, Ontario, Canada — Motion Control Components — Maxon’s new IDX compact integrated servo gearmotor + drive combines a powerful, brushless EC-i motor and an EPOS4 positioning controller, which can be complemented with a maxon planetary gearhead when required. This integrated motor stands out for its high torque density, high efficiency, maintenance-free components, and a high-quality industrial housing providing IP65 protection. The IDX also features configurable digital and analog inputs and outputs, and intuitive software enabling easy commissioning and integration into master systems.

The IDX integrated servo motor yields extremely high continuous torques and high-power density. Its compact size makes the IDX more efficient than current solutions on the market. The unit’s high-quality design is complemented with an IP65-protected housing.

Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics!

Motion Control – Maxon and ANYbotics form New Partnership!

Motion Control Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics and will in future supply the drive systems of the autonomous ANYmal inspection robot. The robot will soon be marketed in large quantities. This cooperation will also benefit maxon, since ANYbotics provides important robotics know-how and is currently the most successful young company in this field.

motion control - maxon to supply drive systems

motion control - maxon logoThe maxon Group contributes 60 years of experience in drive technology to the partnership, as well as a global production infrastructure and validated processes, and will help to advance the industrialization and commercialization of ANYmal – with competitive, high-performance drive systems, twelve of which are used in each robot. “In maxon, we have found the ideal partner for taking care of our drive technology as we transition from small series to mass production. With maxon’s expertise and infrastructure, we will be able to further optimize a core element of our robots and access state-of-the-art production methods,” says Péter Fankhauser, CEO of ANYbotics.Taunton, MA — Motion Control -A solid partnership: maxon and ANYbotics are entering into a close, long-term collaboration and are thus strengthening Switzerland as a prime location for robotics. One of the decisions made by the two partners is that maxon, as global drive specialist, will handle the future development and production of the actuators for ANYmal. ANYmal is an autonomous, four-legged robot that is capable of inspecting and monitoring industrial systems and is destined to also take on dangerous maintenance tasks in the future. The robot can even cope with difficult infrastructures such as stairs and inclines, and is used in a wide variety of industries.

ANYbotics recently won the Swiss Economic Award 2020 and has been chosen as the best young entrepreneur in Switzerland in the Hightech/Biotech category. The company has valuable experience in robotics – a market that offers great potential for maxon. Eugen Elmiger, CEO maxon Group, says: “By collaborating with ANYbotics, we are merging know-how from different worlds. The creativity and high responsiveness of a startup are paired with the global and stable industrial environment of the maxon Group. Together we will create an energy-efficient and intelligent robotic drive, the likes of which has never been seen before.” To further cement the partnership, the two companies are also getting closer geographically: maxon, which has its headquarters in the canton of Obwalden, is opening a lab at the Züri.ch Campus in the Oerlikon district of Zurich, in close proximity to ANYbotics. Here the engineers and technicians will meet to discuss the progress on their projects. Additionally, maxon wants to use the lab to get even closer to ETH Zurich and the University of Zurich, offer technical support to young engineers, provide workspaces, and get talent on board. Eugen Elmiger says: “We are already heavily involved with vocational education in and around Zurich and Lucerne. With the new lab, we will be in an even better position to support talents in drive technology and robotics.”

The Swiss specialist for quality drives

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

 

ANYbotics: Mobile robots for industrial applications

ANYbotics AG is a young company that develops autonomous robots that independently inspect and monitor industrial systems. ANYbotics was born in 2016 as spin-off from ETH Zurich. It was founded with the purpose of commercializing the technology behind the four-legged ANYmal robot. Today, ANYbotics is one of the world’s leading developers of mobile robotics for complex industrial environments. A staff of 50 develops and markets the technology for use in the energy, process and construction sectors.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Check out the new integrated powerful brushless motor and a positioning controller available from Maxon!

Motion Control – Integrated Brushless Motor Controller!

 


motion control - maxon logoFall River, MA — Motion Control – See the new modular compact drive that was developed especially for applications in industrial and logistics automation. The IDX drive combines a powerful, brushless EC-i motor and an EPOS4 positioning controller, which can be complemented with a maxon planetary gearhead when required. This drive stands out for its high efficiency, maintenance-free components, and a high-quality industrial housing with IP65 protection. It also features configurable digital and analog inputs and outputs, and intuitive software enabling easy commissioning and integration into master systems.
motion control integrated motor / controllerEven Stronger, Even Smaller

A solution for confined spaces

Speaking of positioning controllers: The maxon EPOS4 is now also available in a Micro version. As the name suggests, the benefits of these motion controllers are their small size and attractive pricing. The EPOS4 Micro 24/5 is suitable for robotic applications where space is at a premium, and cost-sensitive multi-axis applications.

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – The World’s Most Compact 3000 W Integrated Servo Motor

Motion Control – Compact 3000 W Integrated Servo Motor

Motion Control Integrated Servo Motor

 


motion control - electromateVaughan, Ontario, Canada — Motion Control Components – JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control. JVL’s newest additions to their portfolio is a complete, high-capacity MAC motor® with rating of 3000W. MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Profinet, Nano PLC, RS232/RS485/USB, Process Control, etc.
JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors

New Compact Motor

The MAC motor sets completely new standards for the performance and size of servo controls. With a length of only 311.8mm for a 3000W motor with a torque of 9.55/28.6Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods. So what about vibrations and temperature? As with the other integrated servo motors in the range (50-3000W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

Power Supply and Energy Savings

Powering this motor is easy since it only requires connection of the main voltage of 3x400VAC through the M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC: In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage. In some applications, however, this is not needed and in those cases an optional internal 24VDC supply can be used, requiring only an AC main connection. Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.

Other Advantages

One of the big advantages of using the integrated MAC motors is that you don’t need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling and also installation errors between driver and motor are eliminated. In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence downtime is minimized and production is maximized.

Information on the MAC motor from JVL can be viewed at:

https://www.electromate.com/assets/catalog-library/pdfs/jvl%20industri%20elektronik/JVL_ld0083gb.pdf

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Motion Control ServoStep Integrated Stepper Motor in size NEMA 17, torque up to 0.8 Nm!

Motion Control Integrated Step Motors

motion control integrated stepper motor

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo – and stepper motors introduces a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42×42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.

All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications. The motor contains everything needed to solve a modern control task, either as a stand-alone with own easy programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make simple interface to LabView, Excel, VB or other Windows-programs. Up to 254 axis can be connected on the same RS485 bus.

Key features:
  • Industrial Ethernet. 6 Protocols 
  • Very high motor power and torque
  • Closed-loop operation with current control 
  • Absolute multiturn encoder
  • Safe Torque Off (STO) input
  • High resolution 409600 cnt/rev.
  • Speed 0-3000 in 0.01RPM steps
  • Wide supply range 7-72 VDC
  • Protection class up to IP67
  • M12 or M23 connectors
Motion Control Industrial Ethernet: 

Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP or SERCOS III are available and for EtherCAT and SERCOS III synchronization and drive profiles are available. MACtalk can use Ethernet for commissioning the motor so no need for RS232/RS485 converter or additional cables. The motor has the ability to be upgraded with other protocols or newer versions of the same protocol at any time Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design. The motor is equipped with two Ethernet connectors and a built-in switch, enabling line topology without any extra expensive hardware. Several LEDs, enabling technicians and operators to get a quick status overview.

Motion Control Motor range:
  • MIS171 with 0,15 Nm, length 70,5 mm. 5mm shaft 
  • MIS173 with 0,26 Nm, length 83,5 mm. 5 or 6,35mm shaft
  • MIS176 with 0,80 Nm, length 104,3 mm. 8 mm shaft

The motors can be operated as stand-alone units or controlled from a PLC or PC. The 8 I/Os can be individually configured as digital input, digital output or analog input. As standard, it is possible to communicate with holistic systems via for example Modbus RTU or CANopen. The MAC motor standard protocol that is also supported makes it possible to connect up to 254 other JVL integrated motors. The MIS17 series allows connectivity to all industrial Ethernet interfaces such as Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III.

Motion Control Interface: 
  • Industrial Ethernets Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III
  • CANopen DSP402 and DS301
  • Pulse/Direction mode for electronic gear
  • High speed position capture
  • ActiveX/OCX driver as well as JVL MacTalk Protocol
  • Strong graphic programming with + – * / calculations and advanced features
  • SSI interface for external linear or rotary absolute encoders
  • External encoder for dual closed-loop. 
  • RS485 up to 921 kbit and Modbus RTU
  • RS422 and RS485 for encoder I/O and connection to external HMI, PLC or encoder
  • Point-to-point or multi-axis operation with up to 254 JVL motors on the same RS485 bus
  • Wireless Industrial Ethernet through Bluetooth or WLAN
Motion Control Motor specification: 
  • Built-in PLC with 8 DIO, 24V or 0-5V (12bit) analog input with advanced filtering
  • Speed-precision 0.01 RPM. Acceleration-precision 1 RPM / sec.
  • Absolute multi-turn encoder
  • Built-in encoder for closed loop and stall detection and control 
  • Wide supply range of 7-72 VDC provides high torque at high speeds
  • Dual supply maintain position values etc. in emergency situations
  • Motor current 0-4 Amp RMS and 5,6 Amp peak
  • Closed-Loop operation
  • Double shaft and brake option
  • All connections with M12 connectors in IP67
  • Top or rear-end mounted M12 or M23 hybrid connector

For further information on the JVL ServoStep Series Motors, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – IP65 Integrated Stepper Motors Available from Servo2Go!

Motion Control – Integrated Stepper
motion control - integrated stepper

Greenville, DE —-Motion Control – Applied Motion’s SWM integrated steppers are IP65 rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

motion control - products

The motion control SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant.

Features include:

  • Torque to 340 oz-in
  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder

CLICK HERE Here for information on these IP65 Integrated Steppers

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.comor visit Servo2Go.com at: www.Servo2Go.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Twitter

Facebook

motion control - electromate logo

Motion Control – Closed-Loop Integrated Stepper Motors feature magnetic or absolute encoder feedback Available from Electromate!

Electromate offers JVL Closed Loop Integrated Steppers

Motion Control - Electromate-Logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — JVL presents a new innovative closed-loop stepper motor technology for its NEMA 23 & 34 integrated stepper motor range from 0,1 to 12 Nm. JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.

New Innovative Technology

JVL closed-loop integrated stepper motors, QuickStep®, provide higher torque, faster acceleration, torque control, stall free operation and quieter movements than traditional step motor systems. QuickStep do this with greater efficiency and less motor heating because motor phase current are regulated up and down according to need. Performance of JVL closed-loop steppers are similar to servo motors, but with higher torque and often without need of gearbox, resulting in a more inexpensive solution. Design safety factors have always been high for stepper motors to ensure stall-free operation – now with QuickStep closed-loop control design can be very close to the limit resulting in even lower costs. QuickStep is a true closed-loop control system that compensates step angle errors during a movement and correct errors within a full step. If load becomes too high speed is lowered and position errors will always stay within two full-steps. Smart digital design and very high update rates (36 MHz) means there is no need of any manual adjustment or setup. It works like a perfect stepper motor benefitting from the servo motor technology.

Advantages compared to open loop stepper motors

  • Position feedback and control
  • Fast and easy commissioning. No tuning needed
  • No stalling. No step losses at all
  • Torque control
  • Much faster positioning and more cycles per second
  • Increased efficiency and thereby much lower temperature
  • Shorter settling time
  • Controls higher inertias than open loop steppers
  • Higher load tolerance
  • More quiet operation (lower acoustic noise)
  • Longer lifetime due to lower temperature
  • Correct positioning without overshoot and oscillation

Advantages compared to servo motors

  • Very high Torque at low speed. Often 3-4 times higher in same motor flange size
  • Very high ratio-of-inertia, often up to 40:1
  • Faster commissioning. No tuning needed
  • Lower price. Same price as open loop steppers
  • Totally stiff at standstill. Full holding torque
  • Direct drive without gearbox (better and more precise torque control)
  • Correct positioning without overshoot
  • No oscillation
  • Very short settling time

Benefit in these application from closed-loop stepper motors

  • Multiple axis applications (RS485, CANopen)
  • Industrial Ethernet: Profinet, EtherNet/IP, EtherCAT, Powerlink, Modbus TCP, SERCOS III
  • Magnetic or Absolute Encoder Feedback
  • Positioning tasks with load changes
  • Applications that require quiet operation, short settling times and precision positioning

Applications include

  • Winding applications
  • Belt drives (start/stop, positioning)
  • Dosing pumps and filler systems
  • Semi-conductor mounting
  • Wafer production
  • Textile machines and industrial sewing machines
  • Robotics
  • Testing and inspection systems

More information on the JVL’s Closed-Loop Integrated Stepper Motors can be viewed at the links below-

NEMA 23 models

NEMA 34 models

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Integrated 400Watt Servo Motor with 12-48VDC Battery Supply Voltage Available from Electromate!

Integrated 400Watt Servo Motor with 12-48VDC Battery Supply Voltage Available from Electromate!

Electromate offers JVL's MAC402 Motor

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Designed for battery powered and low voltage applications the MAC402 is now available from Electromate The MAC402 is the VDC version of the popular MAC400 400W integrated servo motor. The supply range for the MAC402 is from 12VDC up to 48VDC, and full power of 400W (RMS) up to 1200W (peak) can be reached with 24 to 48VDC. This powerful, compact motor measures just 191mm (7.52 in.) x 60mm (2.36 in) x 114mm (4.49 in.) Applications include but are not limited to: Remotely operated robots, robotic vehicles, portable equipment, tracking devices, antenna mounts, and positioning devices.

MAC402 – The complete 400W solution for medium power ratings with battery supply 12-48VDC.

Peak power up to 1200W.

Choose between models with or without brakes.

IP55 standard. IP66 optional.

Wireless, Industrial Ethernet Connectivity or PLC build in.

JVL offers a 400W continuous (1200W peak) integrated servo motor in the supply range of 24 – 48VDC operating at 0 to 3000 RPM. In many applications it is not necessary to choose a 750W or larger motor as the 400W (1200W peak) motor will be sufficient, thereby reducing cost and saving space. MAC402 options include: Brake, absolute multi turn encoder, and planetary & cycloidal gearheads.

Electromate offers JVL's MAC402 Battery Powered Motor

A wide selection of communication modules is available for MAC402 motors including: Basic modules for Pulse-Direction (or analog input) or fieldbus modules including Profibus, Devicenet and CANopen, or programmable modules with easy connections to local sensors make integration into new and existing applications easy. Moreover, a wide variety of industrial Ethernet options are available: EtherCAT, EtherNet/IP, Profinet, Powerlink, Modbus TCP and Sercos III. With the VDC supply option the advantages of the MAC400 VAC servos have been expanded to include applications for battery and low voltage operation, from 12 to 48 VDC. With wireless options like WLAN/Wifi, Zigbee or Bluetooth, the MAC402 MAC motor® can run completely wireless.

New features:

  • Absolute multiturn encoder without battery
  • Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII2 RS422 channels for encoder in/output and SSI encoder etc.6 I/O for capture of position, interrupt, counters, enable, timer and PLC functions

Expansion module you can choose between:

  • Basic Modules
  • Programmable Modules
  • Field Bus Modules
  • High Speed Multi-Axis Modules
  • Wireless Modules

A big advantage of using an integrated MAC motor® is that there is no need for a separate servo driver/controller. The advantages are: Space savings in the control cabinet, eliminating expensive motor and encoder cables, RFI/EFI noise is minimized due to internal cabling, and connection errors between driver and motor are eliminated. Additionally, service is much easier as the motor and controller are replaced as a single integrated unit minimizing downtime and maximizing production.

CLICK HERE to view more information on the Integrated Servo Motors from JVL Industri Elektronik.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Integrated IP65 Stepper Motors Available from Servo2Go!

Motion Control Components - Integrated IP65-Stepper Motor available from Servo2Go

Servo2Go-Logo

Greenville, DE —- Motion Control Components – SWM integrated steppers from Applied Motion Products Inc. are IP65 rated drive+motor units, fusing step motor and drive components into a single splash proof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant. Features include:

  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder

For more information on the SWM Integrated Stepper Motors from Applied Motion Products Inc – CLICK HERE

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link