Category Archives: Miniature Spindle Drive

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – The world’s lightest electric mountain bike features maxon BIKEDRIVE AIR

Motion Control – Application – Mountain Bike

With the new Lightrider E Ultimate, Swiss bicycle manufacturer Thömus is launching the world’s first full-suspension cross-country electric mountain bike weighing less than 15 kilograms. This record-breaking weight is made possible by the small and efficient maxon BIKEDRIVE AIR drive in the extremely lightweight Thömus ultra-high modulus carbon frame.

motion control - lightest mountain bike

Taunton, MA — Motion Control – The partnership between Thömus and drive specialist maxon that began in the winter of 2021 is delivering results not only in World Cup racing. Behind the scenes, a lot of work has been done on a new, ultra-lightweight electric mountain bike in recent months, which, together with the maxon BIKEDRIVE AIR drive, heralds a new era for electric mountain bikes.

motion control - maxon

Weighing less than 15 kilograms in total and with a slim, rigid frame, the Lightrider E Ultimate is a real racing bike that can be maneuvered easily and agilely over any terrain.

Motion Control- Application – Underwater inspection on twelve wheels.

Motion Control – Application – Underwater Inspection

Motion Control – Application – Inspecting flooded pipes of power plants requires skilled, high-precision handling. And the robotic vehicles have to be optimized accordingly, for example to dive 20 m deep. The new seawater manipulator is capable of maneuvering underwater in pipes, where it can be used to perform inspections. RE motors by maxon are responsible for the dynamic drive of the robot.

motion control - application

motion control - maxon motor

 

 

Taunton, MA — Motion Control Application – In robotics, manipulators are those devices that enable physical interaction with their surroundings. For this interaction, the robotic vehicles are equipped with appropriate tools, gripper systems or measuring devices. In the case of the seawater manipulator, this equipment largely consists of high-performance cameras used for pipe inspection. Ibass, from Augsburg in Germany, develops, manufactures and distributes manipulators for various in-pipe applications: inspection, grinding, welding, retrieval or suction.

Motion Control – New Rod-style electric actuator from Tolomatic designed to meet hygienic standards available from Electromate!

Motion Control – Rod-style Electric Actuator!

motion control - linear actuators


motion control - electromate robotics

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Products — A new RSH electric hygienic rod-style actuator from Tolomatic delivers clean, continuous control to automation machinery. RSH actuators are designed to help improve repeatability, enhance quality, reduce contamination potential and increase flexibility of hygienic machine designs, particularly for the food, beverage, medical, healthcare and pharmaceutical industries.

Innovative Motion Control – Mars helicopter receives Collier Trophy

Innovative Motion Control – Mars Helicopter!

Innovative Motion Control – The Mars helicopter team is awarded the Collier Trophy for being the first aircraft to achieve powered, controlled flight on another planet. NASA’s Ingenuity helicopter flies with electric motors from the Swiss company maxon, a provider of precision drives. This prestigious award was presented on June 9th in Washington DC by the National Aeronautic Association (NAA)

innovative motion control - collier award

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests extensively in research and development. Worldwide, maxon has 3,059 employees at nine production sites and is represented by sales companies in more than 30 countries.


motion control - maxon motors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Taunton, MA — Innovative Motion Control – Application – Sachseln, Switzerland – NASA’s Mars helicopter is the first controlled aircraft in history to be used on a planet other than Earth, laying the way for future airborne exploratory missions to other planets. The pioneer project has been developed by a team of engineers, including from NASA’s Jet Propulsion Laboratory (JPL), AeroVironment and maxon.

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

 

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – maxon launches light and invisible e-bike system!

Motion Control – Light and Lnvisible e-bike system!

Motion Control – First, maxon’s drives flew on Mars in the NASA helicopter – now they’re letting bike riders lift off.

motion control - invisible electric bike system


motion control - maxon motors

 

 

Taunton, MA — Motion Control – After several years of development, the company presents the BIKEDRIVE Air – a light and invisible e-bike system consisting of a mid-mounted motor, integrated battery, and control element. It can be used to build extremely lightweight racing, gravel, urban, and mountain bikes. The first bicycles made by maxon customers will be introduced to the market this year.

Motion Control – Maxon Introduces a New Series of ECX Flat BLDC Motors for a Wide Range of Robotics Applications!

Motion Control – Flat BLDC Motors for Robotics Applications!

motion control - flat bldc motors


motion control - maxon motor

 

 

Taunton, MA — Motion Control Products –

High-torque External-rotor Motors

Maxon presents another innovation in the area of BLDC motors: the ECX flat product family. These external-rotor motors can be configured online and are optimized for maximum performance thanks to the special winding technology, as well as segmented magnets. The ratio of torque to weight and size is second to none and is ideal for use in UAVs (unmanned aerial vehicle) and robotics applications.

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – Maxon’s UAV propulsion system is Safe, Efficient and Ready for Take-off!

Motion Control – UAV Propulsion System!

Maxon BLDC motors were specifically designed for extreme durability and maximum reliability in professional UAVs.

motion control - - uav propulsion system


motion control - maxon motors

 

 

Taunton, MA — Motion Control Products – maxon actively supports UAV manufacturers with their ambitious designs, up to certification. Our UAV product portfolio offers matched combinations of motors, ESCs and propellers, for optimized propulsion systems providing maximum efficiency and reliability. Hence, operational safety and flight time are maximized, and costs of ownership dramatically cut down

motion control - EC69 specifications

Motion Control – maxon celebrates International Women in Engineering Day!

Motion Control – maxon celebrates International Women in Engineering Day!

The women in engineering (WIE) at maxon work eagerly to contribute to the success of advanced technology in the motion control industry. This week in honor of International Women in Engineering Day, June 23, 2021 – maxon wishes to thank these engineering women for their contributions as they continue to help shape the world we live in.

motion control - engineers


motion control - maxon motorsTaunton, MA — Around the globe, the maxon women in engineering are working on motion control applications with their customers, they focus on new product designs to implement the latest technologies and continue to research new concepts and ideas for drive systems to be used in motion control applications found in Medical, Industrial Automation, Aerospace and Defense, and Mobility industries.

Motion Control – Maxon’s trade show experience goes virtual!

Motion Control – Virtual Trade Show!

motion control - trade show

 

motion control - maxon logo

 

 

Taunton, MA — Motion Control Products – This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

Motion Control – Maxon Opens Manufacturing Facility in Taunton, Massachusetts!

New Facility Expands Maxon’s Operations & Capabilities to Service US Customers.

 

Maxon Logo

 

 

 

Taunton, MA – Maxon precision motors, a division of maxon motor of Sachsein, Switzerland, has announced the opening of a new manufacturing facility in Taunton, MA. The two-story, 59,000 sq. foot facility is located within the Myles Standish Business Park in Taunton at 125 Dever Drive.

Company officials led by Chris Blake, mpm President welcomed state/local officials and invited guests to a grand opening event at the facility this morning which included a ribbon cutting ceremony and tours of the building.

The new building will provide design engineering and production operations, significantly advancing maxon precision motors presence and capabilities in North America. Its opening is an integral component in an ongoing global growth strategy underway by the privately owned Swiss company, in business since 1961.

maxon motor is the leading provider of precision DC motors and drive technology with distribution and sales in 40 countries worldwide. maxon’s products include brushed and brushless DC motors, gearheads, sensors/encoders and customized drives. Its highly engineered products are used in a wide range of industries and applications including medical technology, industrial automation, robotics, security and communications, aerospace, automotive, and measurement/testing.

The new facility replaces a former sales/distribution and assembly operation at 101 Waldron Road in Fall River, MA, and will significantly expand maxon precision motors capabilities and employment. USA customers will benefit from closer collaboration that will provide value added opportunities with faster turnaround. Plus, a localized supply chain with domestic vendors will help build stronger customer relationships while reducing lead times.

“Our vision is to be an integral part of maxon’s global growth strategy,” explained Mr. Blake, who heads up the US management team. “With expanded engineering services in place, our customers will enjoy a closer collaboration on design and manufacturing and have a more direct line to our team during concept development, which will include rapid prototyping to better execute customer-specific products.”

The new Taunton facility will include offices and conference areas, space for warehousing, and significant manufacturing space. PIt will integrate engineering with true high-volume manufacturing capabilities.

About maxon motor maxon motor is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon employs some 2,600 workers at eight production sites and is represented by sales companies in more than 30 countries. www.maxonmotor.com

For More Information Contact: Debora Setters, National Marketing Manager, maxon precision motors, inc. Taunton, MA, dsetters@maxonmotorusa.com/508-916-6602

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Handbook Banner

Maxon Logo
Visit our Website
Order Our Catalog

 

 

 

 

For other Motion Control Components, Applications, and Technology from Maxon Motor visit: http://motioncontrolweb.com

Motion Control – The Maxon GP 6 S Miniature Spindle for Linear Positioning Tasks!

The GP 6 S micro spindle gear has a diameter of six millimeters now also available in a metal version to provide a spindle drive with optimized value.

Maxon motion control Spindle Drive

Maxon Logo

Fall River, MA – Motion Control – Spindle drives are the perfect solution for linear positioning systems, lens adjustment, or syringe pumps. If the drive also has to be compact, then maxon motor’s GP 6 S spindle gear is the perfect choice. To provide a cost-effective alternative to the ceramic version, it is now also available with a metal spindle.

Combinations with maxon DC motors

The GP 6 S spindle gear is suitable for a wide variety of linear drive solutions. The maximum feed velocity is 15 mm/s, at a force of 10 N. Integrated ball bearings ensure that this drive stands up to high axial loads. The gear easily combines with the maxon DC brushed motor (RE 6) and DC brushless motor (EC 6).

More data and details about the new metal version of the GP 6 S spindle gear are available online atwww.shop.maxonmotor.ch.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Logo
Visit our Website
Order Our Catalog