Category Archives: Miniature Motors – Brushless

Motion Control – Maxon Introduces a New Series of ECX Flat BLDC Motors for a Wide Range of Robotics Applications!

June 16, 2022 Editor-Publisher

Motion Control – Flat BLDC Motors for Robotics Applications!

Taunton, MA — Motion Control Products –

High-torque External-rotor Motors

Maxon presents another innovation in the area of BLDC motors: the ECX flat product family. These external-rotor motors can be configured online and are optimized for maximum performance thanks to the special winding technology, as well as segmented magnets. The ratio of torque to weight and size is second to none and is ideal for use in UAVs (unmanned aerial vehicle) and robotics applications.

Motion Control – Match One of These Compact 1.0 Inch Diameter Voice Coil Motors to Your Application’s Stroke Requirements!

June 09, 2022 Editor-Publisher

Motion Control – 1.0 Inch Diameter Voice Coil Motors!

Van Nuys, CA – Motion Control Components – Moticont has added to it’s line of Linear Voice Coil Motors, LVCM, two 1.000 in. (25.4 mm) diameter motors. The LVCM-025-022-01 has a stroke length of 0.375 in. (9.5 mm) a mid-stroke length of 1.30 in. (33 mm) and it has a high force to size ratio of 16.9 oz (4.7 N) and a peak force of 53.5 oz. (14.9 N) at 10% duty cycle. The LVCM-025-029-01 has a stroke length of 0.625 in. (15.9 mm) a mid-stroke length of 1.68 in. (43 mm) with a continuous force of 18.2 oz (5.1 N) and a peak force of 57.7 oz. (16.0 N) at 10% duty cycle.

These compact, high-force-to-size ratio motors are ideal for: work holding and clamping, medical devices, assembly, testing, laser machining and drilling, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering.

Motion Control Application – Maxon Motors Are in A New Docking System for Space Rendezvous!

May 21, 2022 Editor-Publisher

Motion Control Application – Docking System for ISS!

Motion Control Application – The European Space Agency (ESA) is working on a new system to enable easy docking between two spacecraft. maxon developed two special drive systems for this purpose.

Taunton, MA — Motion Control Application – Even though it’s been done many times before, the docking maneuver between two objects in space is always a delicate and potentially dangerous procedure. The speed is extremely high (about 28,000 km/h in case of the ISS), and corrections are difficult. For example, when the two objects are about to meet, maneuvering thrusters can no longer be used, since their exhaust plumes can cause damage. To prevent harm, cargo transporters are caught by a robotic arm installed in the International Space Station (ISS) and berthed manually. Manned spacecraft on the other hand dock directly in a computer-controlled process.

Motion Control SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

April 27, 2022 Editor-Publisher

Motion Control – Voice Coil Motor Power Supply!

Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

Motion Control – Maxon Is Providing Its e-bike Platform and Joining the Thömus Cross-country Team!

April 23, 2022 Editor-Publisher

Motion Control – Maxon Application!

In 2022, Olympic silver medalist Mathias Flückiger rides for the Thömus-maxon cross-country racing team.

Taunton, MA — Motion Control Products – Swiss bicycle manufacturer Thömus and drive specialist maxon are entering into a partnership in cross-country cycling. As part of this cooperation, maxon is providing its e-bike platform to Thömus as the basis for an electric mountain bike for World Cup training. They also plan to make this bike available to the retail trade in the future.

Motion Control – Linear Focus Actuator from Equipment Solutions!

March 30, 2022 Editor-Publisher

Motion Control – Linear Focus Actuator

Forestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system. It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke. The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment. Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.

Motion Control – Maxon Motor Introduces The First Sterilizable Drive System!

March 26, 2022 Editor-Publisher

Motion Control – Miniature Brushless DC motor, Gearhead, Encoder

With the ENX EASY, maxon motor’s NEW ENX EASY is a sterilizable encoder for use with maxon’s brushless DC motors. This opens up a range of new possibilities in medical technology.

Fall River, MA — Motion Control Components – This is the world’s first steam sterilizable encoder ENX EASY. It is available in an incremental (1024 counts) and absolute version (4096 steps), both designed for 1,000 autoclave cycles.

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

March 16, 2022 Editor-Publisher

Motion Control – Mecademic Robotics releases new firmware!

Vaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control Application – Maxon Flat Motors Helps in Keeping Muscles in Shape!

February 11, 2022 Editor-Publisher

Motion Control -Application – Flat Motors

For paraplegic people, rehabilitation is frequently a long process; this is why methods and tech-nology that optimize these measures for the patient are so important. At the Bern University of Applied Sciences, many years of research has led to the development of a recumbent trike with electrical stimulation. The patient’s movements are supported by a maxon flat motor.

Taunton, MA — Motion Control Products – Cycling with a recumbent trike can partially restore lost motor functions of patients with spinal cord lesions. Furthermore, it provides the patients with a very practical and successful basis for cardiopulmonary and muscular training units. The paralyzed leg muscles are reactivated by means of functional electric stimulation (FES) combined with controlled training.

Motion Control – Linear Servo Controller for Non-Commutated Motors!

January 24, 2022 Editor-Publisher

Motion Control – Linear Servo Controller

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

January 21, 2022 Editor-Publisher

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

Taunton, MA — Motion Control Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

January 19, 2022 Editor-Publisher

Motion Control – Sub-micron Positioning Linear Stage!

Forestville, CA – Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

Motion Control – Compact, Four Axis YY’ZZ’ Linear Motor Driven Stage Features High Speed and 1.0 Micron Resolution!

January 10, 2022 Editor-Publisher

Motion Control – YY’ZZ’ Linear Motor Stage

Santa Clarita, CA —– Motion Control – When an application requires fast motion with a stroke over a couple of inches, a brushless linear motor stage will meet the needs of long travel and fast motion when coupled with a motion control system with servo amplifiers and a motion controller. Brushless linear motor stages can be coupled as a gantry for pick-and-place manufacturing or inspection equipment. The fast motion allows for high throughput when manufacturing or examining parts.

Motion Control – maxon launches light and invisible e-bike system!

January 07, 2022 Editor-Publisher

Motion Control – Light and Lnvisible e-bike system!

First, maxon’s drives flew on Mars in the NASA helicopter – now they’re letting bike riders lift off.

Taunton, MA — Motion Control Products – After several years of development, the company presents the BIKEDRIVE Air – a light and invisible e-bike system consisting of a mid-mounted motor, integrated battery, and control element. It can be used to build extremely lightweight racing, gravel, urban, and mountain bikes. The first bicycles made by maxon customers will be introduced to the market this year.

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

December 27, 2021 Editor-Publisher

Motion Control – Six-axis Robot!

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Motion Control – Maxon Expands its range of configurable drives!

December 20, 2021 Editor-Publisher

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – Metric Dimensioned Linear Voice Coil Motors are Now Available from Moticont!

December 13, 2021 Editor-Publisher

Motion Control – Metric Dimensioned Linear Voice Coil Motors!

Van Nuys, CA — Motion Control – Moticont has added Metric dimensioned motors to their popular LVCM Series of Linear Voice Coil Actuators! An example is the miniature LVCM-022-013-01M Linear Voice Coil Actuator. At 22.2 mm (0.875 in.) in diameter and at mid-stroke just 20.7 mm (0.81 in.) long, this new metric miniature voice coil actuator has a continuous force of 4.0 N (14.5 oz) and a peak force of 12.7 N (45.7 oz), and features a 6.4 mm (0.25 in.) stroke.

Motion Control – Maxon’s UAV propulsion system is Safe, Efficient and Ready for Take-off!

November 24, 2021 Editor-Publisher

Motion Control – UAV Propulsion System!

Maxon BLDC motors were specifically designed for extreme durability and maximum reliability in professional UAVs.

Taunton, MA — Motion Control Products – maxon actively supports UAV manufacturers with their ambitious designs, up to certification. Our UAV product portfolio offers matched combinations of motors, ESCs and propellers, for optimized propulsion systems providing maximum efficiency and reliability. Hence, operational safety and flight time are maximized, and costs of ownership dramatically cut down

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

November 12, 2021 Editor-Publisher

Motion Control – Miniature Rotational Voice Coil Stage

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

October 24, 2021 Editor-Publisher

Motion Control – Servo Controller for Non-comutated Devices!

SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25

Forestville, CA, – — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.