Category Archives: Miniature Components

Motion Control – Maxon Introduces a New Series of ECX Flat BLDC Motors for a Wide Range of Robotics Applications!

Motion Control – Flat BLDC Motors for Robotics Applications!

motion control - flat bldc motors


motion control - maxon motor

 

 

Taunton, MA — Motion Control Products –

High-torque External-rotor Motors

Maxon presents another innovation in the area of BLDC motors: the ECX flat product family. These external-rotor motors can be configured online and are optimized for maximum performance thanks to the special winding technology, as well as segmented magnets. The ratio of torque to weight and size is second to none and is ideal for use in UAVs (unmanned aerial vehicle) and robotics applications.

Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control Application – Maxon Motors Are in A New Docking System for Space Rendezvous!

Motion Control Application – Docking System for ISS!

Motion Control Application – The European Space Agency (ESA) is working on a new system to enable easy docking between two spacecraft. maxon developed two special drive systems for this purpose.

motion control - ISS docking system

motion control - maxon motor

 

 

 

Taunton, MA — Motion Control Application – Even though it’s been done many times before, the docking maneuver between two objects in space is always a delicate and potentially dangerous procedure. The speed is extremely high (about 28,000 km/h in case of the ISS), and corrections are difficult. For example, when the two objects are about to meet, maneuvering thrusters can no longer be used, since their exhaust plumes can cause damage. To prevent harm, cargo transporters are caught by a robotic arm installed in the International Space Station (ISS) and berthed manually. Manned spacecraft on the other hand dock directly in a computer-controlled process.

Motion Control – Maxon Is Providing Its e-bike Platform and Joining the Thömus Cross-country Team!

Motion Control – Maxon Application!

motion control - maxon application

In 2022, Olympic silver medalist Mathias Flückiger rides for the Thömus-maxon cross-country racing team.


motion control - maxon motor

 

Taunton, MA — Motion Control Products – Swiss bicycle manufacturer Thömus and drive specialist maxon are entering into a partnership in cross-country cycling. As part of this cooperation, maxon is providing its e-bike platform to Thömus as the basis for an electric mountain bike for World Cup training. They also plan to make this bike available to the retail trade in the future.

Motion Control – Linear Focus Actuator from Equipment Solutions!

Motion Control – Linear Focus Actuator

motion control - linear actuator

 


motion control - Miniature actuatorsForestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.

Motion Control – Maxon Motor Introduces The First Sterilizable Drive System!

Motion Control – Miniature Brushless DC motor, Gearhead, Encoder

motion control - miniature gearmotors

With the ENX EASY, maxon motor’s NEW ENX EASY is a sterilizable encoder for use with maxon’s brushless DC motors. This opens up a range of new possibilities in medical technology.

motion control - maxon

 

Fall River, MA — Motion Control Components – This is the world’s first steam sterilizable encoder ENX EASY. It is available in an incremental (1024 counts) and absolute version (4096 steps), both designed for 1,000 autoclave cycles.

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

Motion Control – Mecademic Robotics releases new firmware!

motion control - electromate robotics


motion control - electromate roboticsVaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its
Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control Application – Maxon Flat Motors Helps in Keeping Muscles in Shape!

Motion Control -Application – Flat Motors

For paraplegic people, rehabilitation is frequently a long process; this is why methods and tech-nology that optimize these measures for the patient are so important. At the Bern University of Applied Sciences, many years of research has led to the development of a recumbent trike with electrical stimulation. The patient’s movements are supported by a maxon flat motor.

motion control maxon application


motion control - maxon

 

Taunton, MA — Motion Control Products – Cycling with a recumbent trike can partially restore lost motor functions of patients with spinal cord lesions. Furthermore, it provides the patients with a very practical and successful basis for cardiopulmonary and muscular training units. The paralyzed leg muscles are reactivated by means of functional electric stimulation (FES) combined with controlled training.

Motion Control – Linear Servo Controller for Non-Commutated Motors!

Motion Control – Linear Servo Controller

motion control - miniature controller

 

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

motion control - miniature components

This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - Application


motion control - maxon motors

 

Taunton, MA — Motion Control Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

Motion Control – Sub-micron Positioning Linear Stage!
motion control - miniature stagemotion control - Miniature actuators

 

 

Forestville, CA – Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

Motion Control – maxon launches light and invisible e-bike system!

Motion Control – Light and Lnvisible e-bike system!

First, maxon’s drives flew on Mars in the NASA helicopter – now they’re letting bike riders lift off.

motion control - invisible electric bike system


motion control - maxon motors

 

 

Taunton, MA — Motion Control Products – After several years of development, the company presents the BIKEDRIVE Air – a light and invisible e-bike system consisting of a mid-mounted motor, integrated battery, and control element. It can be used to build extremely lightweight racing, gravel, urban, and mountain bikes. The first bicycles made by maxon customers will be introduced to the market this year.

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

Motion Control –  Six-axis Robot!

motion control - robot


motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – ADVANCED Motion Controls 60Amp Micro-Sized FlexPro Servo Drives are available from Electromate!

Motion Control – Micro-Sized Servo Drives!

motion control - micro servo drive


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A continuous. The 60A continuous current rating is 33% higher than previous models for the same size making these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded, and Development Board-factors.

Motion Control – Maxon’s UAV propulsion system is Safe, Efficient and Ready for Take-off!

Motion Control – UAV Propulsion System!

Maxon BLDC motors were specifically designed for extreme durability and maximum reliability in professional UAVs.

motion control - - uav propulsion system


motion control - maxon motors

 

 

Taunton, MA — Motion Control Products – maxon actively supports UAV manufacturers with their ambitious designs, up to certification. Our UAV product portfolio offers matched combinations of motors, ESCs and propellers, for optimized propulsion systems providing maximum efficiency and reliability. Hence, operational safety and flight time are maximized, and costs of ownership dramatically cut down

motion control - EC69 specifications

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

Motion Control – Miniature Rotational Voice Coil Stage

motion control- miniature stage

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

motion control - equipment solutions

 

 

Motion Control – Electromate extends its product portfolio to include Robots from Mecademic!

Motion Control – Electromate adds Robots from Mecademic!

motion control - electromate robotics

Electromate’s new partnership with Mecademic will expand its reach to end users and manufacturers needing ultra compact and precise industrial robots across Canada.

 

 

 

TORONTO, Ontario — Electromate Inc., a leading Canadian Distributor of Precision Robotic & Mechatronic Solutions, today announced a partnership with Mecademic, a Montreal based premier manufacturer of the world’s smallest, most compact, and precise industrial robots.

Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-comutated Devices!

motion control - Voice Coil Motor Controller

SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Robotic Cycloidal Gearbox from GAM is available from Electromate!

Motion Control – Robotic Cycloidal Gearbox!

motion control- cycloidal gearbox


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque. The GCL series is available in a wide range of sizes with ratios from 36:1 to 192:1.