Category Archives: Linear Motion Positioning Stage – Miniature

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

Motion Control – LM76 Expands Custom Manufacturing Capabilities!

 

Motion Control - Custom Linear Motion Components and Complete Systems

motion control - custom components

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – the LFA-3403 Is an Open Apeture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Positioning Stage!

motion control - miniature stepper motor stage


motion control - Miniature actuatorsForestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – Linear Focus Actuator from Equipment Solutions!

Motion Control – Linear Focus Actuator

motion control - linear actuator

 


motion control - Miniature actuatorsForestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.    The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques.  The LFA-1205 Linear Focus Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage
motion control - miniature stage

Forestville, CA, — — Motion Control positioning Stage – High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability.

motion control - Miniature actuators

This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.

motion control - miniature stage

The compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Follow Equipment Solutions on Twitter

Follow Equipment Solutions on Facebook

Go to the Equipment Solutions Blog

motion control - equipment solutions

Linear Motion Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

motion control positioning stageMotion Control Positioning Stage

Forestville, CA, —Linear Motion – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

The VCS-1010D linear motion positioning stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type. These compact 76 X 41 X 38 millimeter linear motion stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications.

These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured) with a 6mm lens and manual cross-axis adjustments.Equipment Solutions is a leading authority in the field of linear motion voice coil stages. Recognizing that exceptional performance can only be achieved through a system level approach, ESI also has extensive servo electronics expertise. Equipment Solutions motors and actuators are used in markets ranging from applications where our actuators delicately guide a laser beam over an eye as part of a vision enhancement procedure to military hardware that is battlefield certified, and everything in between.

With a time-to-market as short as four weeks, Equipment Solutions has maintained innovative, high quality products. Equipment Solutions, never loses sight of the value of listening very carefully to client input, nurturing a cooperative working relationship, understanding the big picture but never losing sight of the small details that describe it, and perhaps most importantly, following through with after delivery support.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

For other Motion Control Components, Applications, and Technology from Equipment Solutions visit: http://motionshop.com

 

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Linear Focus Actuator from Equipment Solutions

SForestville, CA, —The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.    The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques.  The LFA-1205 Linear Focus Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

  • 12 Millimeter clear aperture
  • 5 millimeters of linear motion
  • <50 nanometer positioning repeatability
  • Small Step Response of <1 millisecond
  • Threaded lens mount
  • 70 x 70 x 50 millimeters, 600 grams

 

 

By design, the LFA-1205 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Through manufacturing tolerances only there can be a small amount of pitch and roll motion that is induced during the intended translation.  These small but real error sources are routinely characterized during the manufacturing process  using our AC400 Digital Autocollimator to control product uniformity.

Click Here for

  • Motor Force Constant
  • Interface Drawing
  • Downloads

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog

 

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control Miniature Stage

Forestville, CA, — — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.

The compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog

Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

motion control miniature stage

 

Foretville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke. The SMS12 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.

 

Specifications:

  • Translation 43µm/step
  • 0.67µm @ 64µstep/step
  • Maximum Travel 12mm
  • Maximum Acceleration 2G
  • Maximum Velocity 250mm/sec
  • Maximum Load Capacity 13kg
  • Maximum Moment Load 1.8kg
  • Positioning Accuracy ±2µm
  • Bidirectional Repeatability ±1µm
  • Homing Repeatability ±1µm
  • Motor Amps/Phase 0.3
  • Dimensions 39.1 x 39.1 x 31.75mm

The SMS12 can be ordered with an optional stepper motor controller that is nearly the same size a the SMS12 itself. Only raw power and a simple RS232/RS485 communications line is needed to completely control this high-resolution stage.

motion control - SMS-12 Stepper Motor Stage

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

To view and/or down load the Data Sheet CLICK HERE

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

 

 

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

 

 

Forestville, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system. Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

The PVS-5.5 Parallelogram Voice Coil Stage features a high force, frictionless voice coil motor and infinite life flexure system that provides superior responsiveness and accuracy (positioning resolution 75 nm) over conventional lead screw or belt drives and produces the least amount of electrical noise of any motor currently available. The stage can be mounted in a horizontal or vertical position and for easy integration tapped and clearance holes are provided in the base.An integral sub-micron linear displacement sensor with high bandwidth and low noise for high responsiveness and precise movements featuring frictionless optical technology completes this positioning system. This cleanroom compatible positioning system is low cost and uses ±12 V to ±24 V @ 1 A. The PVS-5.5 Parallelogram Voice Coil Stage is available with the Equipment Solutions, Inc. SCA814 Servo Controlled Amplifier, and to aid integration into a new or existing application CAD drawings are available on the Equipment Solutions, Inc, Website at http://www.equipsolutions.com.

 

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.


For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Equipment Solutions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

 

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

Linear Motion – LM76 Expands Custom Manufacturing Capabilities!

 

Linear Motion - LM76 - Machined-Components and Systems

Linear Motion - LM76-Pat-Logo-3

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Linear Motion - LM76 Custom Manufacturing and Custom Machining Facility

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

Linear Motion - LM76 Custom Shafting

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:  

http://lm76.com/linear_shafting.htm

 Components, and …

 

lm76-machined-components-05

For additional information go to:  http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

 

Linear Motion - LM76's Custom Linear Motion Systems

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel.  Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

 

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Motion Control – Steinmeyer Stages Are Driven by Piezo Technology!

Motion Control – Piezo driven stages
Steinmeyer PMT 160 Piezo Driven Stage


motion control piezo driven stageWoburn, MA -Automation -Steinmeyer, Inc. announced another addition to its extensive family of linear positioning stages. The new PMT-160-NM Series of stages. These are high precision linear stage with 160mm width and driven by modern piezo technology. The linear stages of the PMT series are optimized especially for use in the metrology world. Outstanding low deviations from straightness and flatness as well as high system accuracies characterize these stages. In the design of the PMT series we paid particular attention to flexibility. For an optimum motion system solution, controllers are offered to meet the sophisticated application criteria. The FMC series controllers are available as table-top, DIN-rail mount or 19″ rack versions for industrial applications.

There are 7 models in this series. Travels range from 50mm to 250mm, unidirection repeatability is as low as +/- 0.3 µm, accuracy +/- 1.5 µm, and resolution is +/- 0.1µm. The maximum speed of all in this series is 250 mm/sec. and 2 acceleration is 2 m/s2.

For additional information got to
http://mechatronik.steinmeyer.com/en/products/1/3/products_detail/pmt160-nm/

The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.

Contact Steinmeyer for further information on their extensive product portfolio:

781-273-6220

infoUSA@steinmeyer.com

Visit steinmeyer.com/

motion control
Visit our Website
Order Our Catalog
Steinmeyer Motion Control Videos
Other Steinmeyer Motion Control Ball Screw Blog

Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage!

High Performance Motion Control Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Equipment Solutions Motion Control SMS Step Motor Positioning Stage

Equipment Soultions

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke. The SMS12 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.

 

Specifications:

  • Translation 43µm/step
  • 0.67µm @ 64µstep/step
  • Maximum Travel 12mm
  • Maximum Acceleration 2G
  • Maximum Velocity 250mm/sec
  • Maximum Load Capacity 13kg
  • Maximum Moment Load 1.8kg
  • Positioning Accuracy ±2µm
  • Bidirectional Repeatability ±1µm
  • Homing Repeatability ±1µm
  • Motor Amps/Phase 0.3
  • Dimensions 39.1 x 39.1 x 31.75mm

The SMS12 can be ordered with an optional stepper motor controller that is nearly the same size a the SMS12 itself. Only raw power and a simple RS232/RS485 communications line is needed to completely control this high-resolution stage.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

To view and/or download the Data Sheet CLICK HERE

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Equipment Soultions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog