Category Archives: Linear Motion Positioning Stage

Motion Control – Precision Manual XYZ Stage from OES!

Motion Control – Precision Manual XYZ!

motion control - xyz manual Stage
motion control - stage

 

 

Van Nuys, CA —– Motion Control – This manual crossed roller XYZ-axis positioning stage is made of aluminum alloy with an black anodized coating. The table size is 25 x 25 mm has a body weight of 0.16 Kgf. The maximum load of this super thin table is 1 Kgf. The movement accuracy is Straightness 5µm ,Vertical yawing 30″ and Parallel yawing 25″.

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – The Engineering Edge – Special Machined Linear Shafting

Motion Control – Custom Machined Linear Shafting

Motion Control – Linear Guide Systems Move 1200 Lb. Loads At Speeds Of 30 Feet Per-Second!

Motion Control – High Speed Block and Rail Sets
motion control - linear block & rail

motion control - linear motion products

 

 

E. Longmeadow, MA – Motion Control – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices).

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage

motion control - vertical stage

motion control - OES

 

 

 

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.).

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

Motion Control – Motion Controllers for Servos and Steppers!


Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one to four axes of motion for users without prior motion control experience. These MCC controllers integrate a motion control card and operator interface in one package. Having a user-friendly interface, they allow the user to operate the motion controller, without the need for a PC, PLC, host controller, or programming.

motion control - stages - custom

 

 

The modes of operations are: Set Acceleration, Set Velocity, Set Position, Absolute Move, Relative Move, Find Home, Reset Position Counter, Go to Position Zero, Joystick Operation and Stop All Motors. The MCC Controllers feature a 4-Line LCD, 32-button keypad, STEP and DIRECTION outputs for each axis.

Motion Control SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply!

motion control - voice coil motor power supply


Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

motion control - miniature components

LM76 – Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

motion control - linear slides


motion control - lm76

 

E. Longmeadow, MA Motion — Control Components – Linear Motion – FDA/USDA/3A-Dairy compliant, Water Dog Sliders from LM76 feature Corro-SlickTM coated 300 series stainless steel rails and contoured WDX Polymer blocks. Water Dog Sliders can be washed down with the most aggressive chemicals and caustic foaming agents and have an operating temperature range of – 400O to +180 OF. Quiet, low maintenance Water Dog Sliders can be used: Dry, submerged in liquids, and in refrigerated and frozen environments.

Motion Control – Linear Focus Actuator from Equipment Solutions!

Motion Control – Linear Focus Actuator

motion control - linear actuator

 


motion control - Miniature actuatorsForestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.

Motion Control – The Engineering Edge – FDA/USDA/3A-Dairy Compliant Linear Motion Bearings!

Motion Control – USDA/FDA/3A-Dairy Compliant Linear Motion Components

motion control - metric linear bearings
LM76 offers Metric FDA/USDA/3A-Dairy compliant self-lubricating linear bearings for: Food Processing, Packaging, Bio/Pharmaceutical, and Medical Systems!

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

Motion Control – Mecademic Robotics releases new firmware!

motion control - electromate robotics


motion control - electromate roboticsVaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its
Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Automation – High Force Air Bearing XY Voice Coil Positioning Stage!

Motion Control – Air Bearing-Stage
motion control - air bearing stage

motion control - h2w

 

 

 

Santa Clarita, CA —– Linear Motion – H2W introduces its latest custom XY voice coil positioning stage (VCS08-700-08/350-AB-01-MC-XY) which is guided by precision air bearings. This minimizes the amount of friction and reduces the pitch, yaw, and roll in the system. The stage is driven by three NCC series moving coil type linear actuators which are guided by parallel air bearing shafts. It is operated under closed loop position control. This system was designed specifically for an accelerometer testing application.

Motion Control – Linear Servo Controller for Non-Commutated Motors!

Motion Control – Linear Servo Controller

motion control - miniature controller

 

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

motion control - miniature components

This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

motion control- xy stages

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

motion control - OES

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Linear Motion – FDA/USDA/3A-Dairy Compliant ETX Scraper Seals for Linear Bearings Used In Food Processing Applications!

Motion Control – ETX Scrapers and Seals

E. Longmeadow, MA – Motion Control Components – Linear Motion – LM76 has introduced FDA/USDA/3-A Dairy compliant, snap-in ETX Scraper Seals for linear bearings. Machined from Ertalyte® PET-P, ETX Scraper Seals have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures than seals from other materials. Designed with a slight interference fit between bearing ID and shaft, ETX Scraper Seals prevents contaminates and debris from migrating beneath the seal as it scrapes the shaft surface.

motion control - linear bearings

Ertalyte® PET-P’s low frictional characteristics have little impact on drive force. These FDA/USDA/3-A Dairy compliant scraper seals are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

Motion Control – Compact, Four Axis YY’ZZ’ Linear Motor Driven Stage Features High Speed and 1.0 Micron Resolution!

Motion Control – YY’ZZ’ Linear Motor Stage

motion control - yy zz stage


motion control - H2W logo

 

 

 

Santa Clarita, CA —– Motion Control – When an application requires fast motion with a stroke over a couple of inches, a brushless linear motor stage will meet the needs of long travel and fast motion when coupled with a motion control system with servo amplifiers and a motion controller. Brushless linear motor stages can be coupled as a gantry for pick-and-place manufacturing or inspection equipment. The fast motion allows for high throughput when manufacturing or examining parts.

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!

Motion Control – Joysticks

motion control - Joystick
Van Nuys, CA – — OES (Optimal Engineering Systems, Inc.) has expanded its line of Joysticks for 1, 2 and 3 axis Stages and Actuators. These are easy to use, single-handed, ergonomic joysticks that provide proportional control of the X, Y, and Z axis of from one to three actuators. Low, medium, and high speed ranges are button selectable. The X, Y, and Z axis speeds are controlled by the tilt angle of the handle and the angle of rotation of the knob.

motion control - stages - custom

The maximum speeds may be set by the user via the supplied, easy to use GUI.

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

Motion Control –  Six-axis Robot!

motion control - robot


motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Motion Control – Pegasus Linear Bearings – For the Time A Linear Bearing Simply Cannot Fail!

Motion Control – Hybrid Ceramic Ball Linear Bearings

For those times when a Linear Bearing “CANNOT” Fail!

motion control - linear bearings


motion control - linear motion products

 

 

E. Longmeadow, MA –Motion Control – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments, when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.