Category Archives: Linear Motion Components – Pillow Blocks

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

Motion Control – LM76 Expands Custom Manufacturing Capabilities!

 

Motion Control - Custom Linear Motion Components and Complete Systems

motion control - custom components

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Positioning Stage!

motion control - miniature stepper motor stage


motion control - Miniature actuatorsForestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments
motion control pillow blocks/bearings

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water. Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

ETX bearing-blocks are also FDA/USDA/3-A Dairy compliant and are also are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT features a high continuous service temperatures up to 210°F (100°C) and offers good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These ETX linear bearing-blocks with the slight interference fit keeps the bearing free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned.

Don’t need solid EXT bearing-blocks consider the FDA/USDA/3-A Dairy compliant electroless nickel coated or stainless steel pillow blocks with PTFE linear bearings and Snap-in EXT Scraper Seals which are available for closed linear bearings, and closed pillow and flange blocks.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

For other Motion Control Components, Applications, and Technology from LM76 go to: http://AllMotionBlogger.com
 

LM76
Visit our Website
Order Our Catalog

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

motion control FDA compliant components

 

LM76

E. Longmeadow, MA — Motion Control Components – Linear Motion – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. In addition to needing FDA compliant materials that will be used in the actual masks, gowns, and ventilators, the tooling used to manufacture these products may also need to meet FDA compliance standards. Depending on the product being manufactured, the tooling may need to be: Washed down using caustic chemicals, cleaned with high pressure steam, or sterilized with high Intensity Ultra Violet light or radiation.

Ordering custom FDA compliant linear motion slides and XYZ stages can result in long delays. As an alternative, many companies have linear motion slides in stock for immediate delivery, however, they may not be FDA compliant. In many cases it is the bearings that are not in compliance. LM76 manufactures several types of FDA compliant linear bearings and pillow blocks that are drop-in-replacements for existing bearings. FDA compliant bearings and pillow blocks from LM76 will not trap contaminating debris and can be thoroughly sanitized following Sanitation StandardOperating Procedures (SSOPs). SSOPs are detailed schedules and procedures specifying what to clean, how to clean, how often to clean, and the record keeping used for monitoring.

A helpful component selection guide from LM76, “Linear Bearings, 6 Simple Steps – FDA Compliance, Wash Down Compliance,” details the linear motion components available from LM76 that are FDA/UDSA/3A-Dairy compliant. Included are: Foodstream electroless nickel plated pillow blocks, PTFE lined stainless steel bearings, ceramic coated linear bearings, self-aligning corrosion resistant linear ball bearings, and Thomson® Super SmartTM corrosion resistant, self-aligning, high load linear ball bearings, and solid ETX pillow block/bearings. Shafting to compliment the type of bearing selected includes: Class L Stainless 303/304/316, 440C case hardened stainless, Rc 60 case hardened steel with an Armoloy coating and also Rc78 Class L for enhanced hardness and wear resistance. End blocks and shaft supports that have a ceramic or electroless nickel coating are also available, as well as new ETX Scraper Seals that prevents intrusion of contaminates adding another line of defense.

LM76 also designs and custom builds linear slides from Stainless Steel and other FDA wash down compliant materials.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com


See this and other Motion Control Components from LM76 featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LM76Blogger.com


LM76
Visit our Website
Order Our Catalog

 

 

The Engineering Edge – Application – ETX Pillow Blocks!

the engineering edge application

This was a troublesome application. This system is completely submerged in radioactive water at a nuclear power plant. So no Teflon, no seals, no lubrication – nothing that will degrade in a radioactive environment. The majority of components are stainless steel – except for our ceramic coated/supported shafting and our special, designed for this particular application/never made before, ETX self-lubricating linear blocks. As you see, there is a circular saw which cuts metal-mesh filters which need to be replaced every few months. A big solution for a pressing application. For more information, call 1-800-513-3163 or email: mquinn@LM76.com 

the engineering edge

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

 
 
 

For other Motion Control Components, Applications, and Technology from LM76 visit: http://motionshop.net

“New Design” Pillow Blocks from LM76!

Engineering edge - new design pillow block

When our customer, a major European manufacturer of machinery for the paper industry, informed us they were having failures with linear bearings in their robotic paper slicing system, we listened. As a robotic arm swings around (360 degrees) it slices the paper to length. After cutting the paper to length, a linear table below indexes new paper forward for cutting. After making the desired cut, the blade then passes through sharpeners below – located in the indexing table – where the linear bearings are located. As the blade passes through the sharpeners, it deposits a fine metal dust on the shafts. As the bearings pass over the shafts, the metallic grit invades the bearing – eventually leading to bearing failure. Because there are 32 pillow – 50mm – pillow block bearing assemblies, change-out is no small matter. LM76 designed an End Cap/Beryllium Scraper Seal kit which is retained in both ends of the pillow block. We were able to cut downtime by 90%. The customer is extremely pleased they found an answer. But the answer was not found in any catalog, it had to be designed and manufactured. 

 

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

Linear Motion Control Technology – “New Design Pillow and Flange Blocks!

Motion Control – Stainless Steel And Self Aligning Linear Ball Bearings Are Easily Lubricated Right Inside of LM76’s “New Design” Pillow And Flange Blocks!

Linear Motion Control - LM76 New Design Pillow and Flange Blocks!

 

LM76

E. Longmeadow, MA Motion Control Components – Linear Motion – Lubricating Stainless Steel and Self-Aligning Linear Ball Bearings has never been easier! “New Design” pillow blocks and flange blocks from LM76, features a lubrication fitting, and an alignment set screw in the pillow blocks and flange blocks, and the Stainless Steel and self aligning linear bearings are modified by having an alignment flat ground on the bearings’ outer shell and drilling a hole through the outer shell. Lubricants can then be pumped directly inside of linear ball bearing races without having to remove the bearing from the shaft. The Pillow and Flange Blocks also have been designed to accommodate an encapsulated ETX Scraper Seals that prevents contaminants from getting inside the bearing and retains the lubricant in the bearing.

These “New Design” pillow blocks are available in closed single and double bearing models for inch sized shafts from 0.5 inches up to 2.00 inches and the flange blocks are available in single and double bearing models for inch sized shafts from 0.5 inches to 1.25 inches.

They “New Design” pillow blocks are available in untreated aluminum or with a FDA/USDA/3A-Dairy compliant corrosion resistant Electroless Nickel coating. When used with a FDA/USDA/3A-Dairy compliant lubricant the pillow block and flange block bearing combinations are ideal for: Food processing, handling, and packing, bottling, pharmaceutical production and packaging, medical testing or patient handling, and other applications where there are corrosive or contaminating fluids (e.g. fruit juices, biologics, etc.), or when cleaning with steam and/or caustic chemicals is required. LM76 also produces PTFE, filled PTFE, and ceramic bearing options as well as precision shafting.

Shafting options include: Solid and hollow Class L RC60, 300 series stainless steel in lengths to 12 feet. FDA/USDA/3A-Dairy compliant, shafting features: Excellent corrosion and chemical resistance, custom machining to print, pre-drilling and assembly.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – FDA/USDA/3-A Dairy Compliant Linear Motion Components

Motion Control - Linear Motion - Fluidline Linear Bearings

 

Motion Control – Linear Motion – LM76 FluidLine Motion Control Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell. FluidLine bearings will simply wear more and more until they are too sloppy and can replaced at your convenience. They are also less expensive in volume because there are fewer manufacturing operations. We can easily design and produce special ID’s, OD’s, Lengths and features such as flanges.

For Additional Information:

Fluidline Linear Bearings (Description) CLICK HERE

Fluidline Linear Bearings (Catalog page) CLICK HERE

Electroless Nickel Pillow Blocks and Flange Blocks CLICK HERE

FDA/USDA/3-A Dairy Compliance Brochure CLICK HERE

Call Mike Quinn 1-800-513-3163 to find out if FluidLine is a good match for your application.

Or email: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – FDA/USDA/3A-Dairy Compliant ETX Scraper Seals for Linear Bearings Used In Food Processing Applications!

Linear Motion control Components - LM76 ETX-Seals!

LM76

E. Longmeadow, MA –Motion Control — Linear Motion – LM76 has introduced FDA/USDA/3-A Dairy compliant, snap-in ETX Scraper Seals for linear bearings. Machined from Ertalyte® PET-P, ETX Scraper Seals have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures than seals from other materials. Designed with a slight interference fit between bearing ID and shaft, ETX Scraper Seals prevents contaminates and debris from migrating beneath the seal as it scrapes the shaft surface. Ertalyte® PET-P’s low frictional characteristics have little impact on drive force. These FDA/USDA/3-A Dairy compliant scraper seals are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT Scraper Seals feature a high continuous service temperature up to 210°F (100°C) and offer good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These linear bearing scraper seals keep bearings free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned. Snap-in EXT Scraper Seals are available for closed linear bearings, and closed pillow and flange blocks.

Linear Motion Components - LM76 ETX-Scraper Seals!

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

Linear Motion – LM76 Expands Custom Manufacturing Capabilities!

 

Linear Motion - LM76 - Machined-Components and Systems

Linear Motion - LM76-Pat-Logo-3

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Linear Motion - LM76 Custom Manufacturing and Custom Machining Facility

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

Linear Motion - LM76 Custom Shafting

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:  

http://lm76.com/linear_shafting.htm

 Components, and …

 

lm76-machined-components-05

For additional information go to:  http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

 

Linear Motion - LM76's Custom Linear Motion Systems

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel.  Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

 

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Motion Control – FOODSTREAM Pillow and Flange Blocks Are FDA/USDA and 3A-Dairy Compliant!

Motion Control Components -Linear Motion - FDA/USDA/3A-Dairy Compliment Components!

LM76

E. Longmeadow, MA — FDA/USDA/3A-Dairy Compliant Motion Control Components – Linear Motion – FOODSTREAM electrodeless Nickel plated pillow and flange blocks from LM76 are FDA/USDA/3A-Dairy compliant linear motion components. They complement LM76’s line of FDA compliant bearings, scraper seals, and shafting. FOODSTREAM off-the-shelf pillow and flange blocks are ideal for use in processing and packaging food, producing pharmaceuticals, the BioPharma industry, and in medical devices. Inch size FOODSTREAM pillow blocks are available in single and double length sizes, and as closed or open models in sizes from .5 in. to 1.5 in. Electrodeless Nickel protects the aluminum base from corrosive liquids, harsh caustic wash down chemicals, and biological fluids. FOODSTREAM Pillow and Flange Blocks are also available with FDA/USDA/3A-Dairy compliant scraper seals (closed bearings and pillow blocks only) and in custom sizes and designs.

To complement the FOODSTREAM pillow and flange blocks, system designers can select from a broad range of FDA/USDA/3A-Dairy compliant linear bearings when developing products or equipment that is going to be subjected to: Contamination of a processing plant, caustic chemical wash downs, corrosive fruit juices, biological fluids, and submersion in water or sterilizing chemicals.

FDA/USDA/3A-Dairy compliant bearing options include: Self-lubricating PTFE composite bearings in 300 Series Stainless Steel shells or lower cost ceramic coated shells, a thermoplastic Polyester bearing, ceramic, and Stainless Steel 440C ball bearing linear bearings. Depending on the bearing type they are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings. Compliant scraper seals are available for closed pillow and flange blocks.

Shafting options include: Solid and hollow Class L RC60, 300 series stainless steel in lengths to 12 feet. FDA/USDA/3A-Dairy compliant, shafting features: Excellent corrosion and chemical resistance, custom machining to print, pre-drilling and assembly.

For Additional Information About FOODSTREAM FDA – USDA – 3A Dairy Compliant Components CLICK HERE!

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog