Category Archives: Gantry – Robots

Motion Control – Single Rail Positioning Stage H Gantry from H2W Technologies.

H2W Technologies Single Rail Positioning System

H2W Logo

Santa Clarita, CA —– H2W Technologies’ latest single rail positioning stage H-gantry design is an open frame XY positioning system. It has two bottom parallel axes with one cross axis connecting the two (H-gantry).

Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; can generate 6.2 lbs [27.8 N] of continuous force and 18.7 lbs [83.3 N] of peak force, or a combined 12.4 lbs [55.6 N] continuous force and 37.4 lbs [166.6 N] of peak force on the bottom axis. The non-contact 1-micron resolution encoders allow for precise positioning. The moving tables are guided by a precision recirculating linear ball bearing system.

The linear axes are assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. The top cross axis is mounted to the bottom parallel axis using rigid aluminum extrusions, 90-degree right angle gussets, and custom extrusion end plates. The system is mounted to a flat aluminum tooling plate base. There are also provisions that allow customer cables to be routed within the cable carriers. It has end-of-travel rubber bumper stops.

Additional options include, a home positioning sensor, end-of-travel-sensors, and custom mounting holes. Single extrusion length of up to 6 m long, allows for longer stroke applications.

Features:

  • Low system weight
  • Built using standard extrusion profiles
  • Cable carriers to route payload cables
  • Three axis of coordinated motion

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

See Article: https://www.h2wtech.com/article/single-rail-positioning-stage-h-gantry

See Video at Youtube: https://youtu.be/y25d5vgx838

See Product: https://www.h2wtech.com/page/single-rail-positioning-stage-h-gantry

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Open Framed XY Gantry for Printed Circuit/Microprocessor Scanning

Motion Control Open Frame Gantry from H2W Technologies

 

 

 

 

 

 

 

 

 

Motion Control – H2W’s latest motion control custom open framed XY gantry for printed circuit/microprocessor scanning. The bottom axis is powered by a 34 frame stepper motor with belt and pulley system while the top axis is driven by a high speed brushless linear motor. This linear motion XY stage was designed for a step and repeat scanning application.

H2W Technologies offers: Custom stroke, force, and configurations of open framed XY gantries. Call with your requirements.

H2W linear motion Logo

LINEAR MOTION XY STAGES FEATURES:
– Stage includes cable carriers for routing payload wires and/or hoses
– Each axis incorporates a 1 micron resolution linear encoder for position feedback
– Stage supplied with fully integrated 2 axis programmable motion control electronics

SPECIFICATIONS:
X Travel: 24 in (600 mm)
Y Travel: 24 in (600 mm)
Payload: Up to 10 lbs (4.5 kg)
Acceleration: 0.1 to 5 G’s
Encoder: 1 micron resolution

To see the Video of the Open Frame XY Gantry Robot in action – Click Here!

H2W Technologies, Inc. is dedicated to the design and manufacture of linear motion and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other linear motion products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear motion and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26470 Ruether Avenue #102, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

You Tube