Category Archives: Encoders – Industrial Grade

Motion Control – IncOder™ Inductive Angle Encoder by Zettlex available from Electromate!

Motion Control – Inductive Angle Encoder by Zettlex!

motion control encoders

 


motion control - electromateVaughan, Ontario, Canada — Motion Control – Zettlex position sensors (IncOders) use non-contact, inductive technology for precision angle measurement. Rather than the bulky transformers of traditional inductive sensors, Zettlex sensors use printed circuits. This enables compact, accurate, lightweight and robust position sensors with no contacts, no delicate parts, no maintenance, no hassle – just accurate measurements – all day, every day. IncOders are ideally suited to harsh environments – where potentiometers, optical or capacitive devices may prove unreliable.

IncOders have 2 main parts – a Stator and a Rotor – each shaped like a flat ring. The large bore makes it easy to accommodate through-shafts, slip-rings, optical-fibres, pipes or cables. The Stator is powered and the Rotor is passive. The Stator contains the electronics to receive power and generate an output signal. The output signal from the Stator shows the true absolute angular position of the Rotor relative to the Stator without the need of any motion.

IncOder inductive angle encoders do not require compliant or special couplings and the Rotor & Stator can simply be screwed to the host product. Precise mechanical mounting is not required and there are no bearings. Whereas optical or capacitive angle encoders can be unreliable in harsh conditions – notably with condensation or dust – Zettlex angle encoders are generally unaffected by foreign matter and IP67 rated versions are available. Unlike capacitive devices, there is no need to earth the Rotor or Stator. Robust, hard-anodized aluminium alloy housings and monolithic constructions are used throughout. There are no contacting, delicate or wearing parts, so there is no need for periodic replacement, service or maintenance. In other words, IncOder angle encoders are true ‘fit and forget’ devices.

Features include:

  • Robust Angular Position Measurement for Extreme Environments
  • High-reliability Inductive Angle Encoder Technology
  • Simple installation; ‘fit and forget’ technology
  • Non-contact technology for high reliability in extreme environments
  • Proven in Aerospace, Defense, Medical & Industrial applications
  • Over 4 million product configuration options available

CLICK HERE for information on the IncOder™ Inductive Angle Encoder from Zettlex

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Motion Control – Industrial Grade Optical Encoder from Quantum Devices!

Motion Control Industrial EncodersMotion Control Industrial Encoder

 

Servo2Go-Logo

Greenville, DE —-Motion Control Components – Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using a standard size 20 package. The QDH20 provides encoder feedback in standard industrial mounting configurations with superb mechanical and environmental protection. Outputs consist of a quadrature A & B with reference pulse Z as a standard feature.

The output can be configured with either the industrial standard 5 to 26 volt OL7272 line driver or open collector outputs. The QDH20 features two heavy-duty bearing sets holding the output shaft, and two more bearings along with an integral flexible spring mount to isolate the working pieces of the encoder from mechanical stresses.

Feature include:

  • 500 kHz Fundamental Frequency Response
  • High Operating Temperature Option (100 C)
  • Resolutions up to 5000 lines per revolution direct read
  • Flange and Servo Mount Options
  • 0.375″ shaft diameter
  • High Noise Immunity

CLICK HERE for more information on the QDH20 Size 20 Industrial Grade Encoder from Quantum Devices.https://www.servo2go.com/suppliers/quantum-devices-inc/

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – New Industrial Grade Optical Encoder from Quantum Devices!

New Industrial Grade Optical Encoder from Quantum Devices!

Motion Control Components - Industrial Encoders from Servo2Go

Servo2Go-Logo

Greenville, DE —-Motion Control Components – Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using a standard size 20 package. The QDH20 provides encoder feedback in standard industrial mounting configurations with superb mechanical and environmental protection. Outputs consist of a quadrature A & B with reference pulse Z as a standard feature.

The output can be configured with either the industrial standard 5 to 26 volt OL7272 line driver or open collector outputs. The QDH20 features two heavy-duty bearing sets holding the output shaft, and two more bearings along with an integral flexible spring mount to isolate the working pieces of the encoder from mechanical stresses.

Feature include:

  • 500 kHz Fundamental Frequency Response
  • High Operating Temperature Option (100 C)
  • Resolutions up to 5000 lines per revolution direct read
  • Flange and Servo Mount Options
  • 0.375″ shaft diameter
  • High Noise Immunity

CLICK HERE for more information on the QDH20 Size 20 Industrial Encoder from Quantum Devices. http://servo2go.com/supplier.php?id=1057843244

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link