Category Archives: Electric Cylinder

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – Direct Drive Linear Motors with Integrated Encoders Offer High Resolution, Speed, No Backlash, and Zero Cogging!

Motion Control – Direct Drive Linear Motors

motion control - direct drive linear motor

motion control - moticint

 

 

Van Nuys, CA – Motion Control – The new, SDLM-025-070-01-01 direct drive linear motor from Moticont, also known as an electric cylinder, features a built-in encoder, has zero backlash, zero cogging, and provides users with high acceleration, high speed, high resolution, and long life.  This direct drive linear motor features 1.25 µm (0.000049 in.) in of resolution.

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

motion control - electric cylindermotion control - moticont

 

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – Voice Coil Motor with Internal Shaft and Bearing Features High Force to Size Ratio and 2.75 Inch Stroke Length!

Motion Control – Electric Cylinder

Motion Control Electric Cylinder / Voice Coil Motor

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components – High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, an internal shaft and bearing are features of Moticont’s GVCM-051-089-05S06 Linear Voice Coil Motor. This compact, voice coil motor has a high force to size ratio with 5.5 lbs (24.6 N) continuous force and 17.5 lb (77.7 N) of peak force with a housing measuring just 2.000 in. (50.8 mm) dia. x 3.50 in. (88.9 mm) long.

Motion Control – New Rod-style electric actuator from Tolomatic designed to meet hygienic standards available from Electromate!

Motion Control – Rod-style Electric Actuator!

motion control - linear actuators


motion control - electromate robotics

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Products — A new RSH electric hygienic rod-style actuator from Tolomatic delivers clean, continuous control to automation machinery. RSH actuators are designed to help improve repeatability, enhance quality, reduce contamination potential and increase flexibility of hygienic machine designs, particularly for the food, beverage, medical, healthcare and pharmaceutical industries.

Motion Control – New Rod-style electric actuator from Tolomatic designed to meet hygienic standards available from Electromate!

Motion Control – Rod-style Electric Actuator!

motion control - linear actuators


motion control - electromate robotics

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Products — A new RSH electric hygienic rod-style actuator from Tolomatic delivers clean, continuous control to automation machinery. RSH actuators are designed to help improve repeatability, enhance quality, reduce contamination potential and increase flexibility of hygienic machine designs, particularly for the food, beverage, medical, healthcare and pharmaceutical industries.

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.

5 Micron Resolution, Zero Backlash, Zero Cogging, High Speed Direct Drive Linear Motor With Integrated Encoder!

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added another linear motor to its SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. The SDLM-051-095-01-05 is a powerful, compact linear actuator measuring just 2.00 in. (50.8 mm) in diameter and 3.75 in. (95.3 mm) long. It has a 1.0 in. (25.4 mm) stroke and features a resolution of 5 microns (0.000197 in.). The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible bandwidth and accuracy and is protected by the housing. This fully enclosed linear motor features a continuous force rating of 7.6 lbs (33.9 N) and a peak force of 24.1 lbs. (107.2 N) at 10% duty cycle.

motion control - moticont

Applications Include: Vibration, noise cancelation, photonics, gimbals, antenna positioning, medical devices, semiconductor handling, SMT machines, assembly, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder
motion control - moticint

 

 

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Electric Cylinder has Increased Throughput!

 

motion control - electric cylinder

motion control - moticont
Van Nuys, CA — The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

motion control - moticint

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

Motion Control – Moticont Voice Coil Motor with Internal Shaft and Bearing Features 3.75 Inch Stroke Length!

motion control voice coil motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – The GVCM-051-127-01 Linear Voice Coil Motor is Moticont’s newest linear DC Motor with Internal Shaft and Bearing. The 3.75 in. (95.3 mm) stroke of the precision ground 0.236 (6.0 mm) diameter shaft with an internal thread, is guided by a long-life plain bearing that can allow side loads up to 1 lb (4.4 N). The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into existing and future applications. This brushless voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size ratio of 5.0 lbs (22.2 N) continuous force and 15.8lb (70.3N) of peak force in either direction, in a housing measuring just 2.00 in. (50.8 mm) dia. x 5.00 in. (127.0 mm) long.

Clean, quiet, efficient, with low inertia the GVCM-051-127-01 Linear Voice Coil Motor is ideal for: Assembly and sorting equipment, work holding and clamping, medical devices, wafer handling, optical focusing, antenna positioning, testing, slide actuators, shutters, doors and valve actuation.

Moticont’s GVCM-051-127-01 Linear Voice Coil Motor can be ordered as a complete plug-and-play system including an encoder and servo controller for precise closed-loop operation. Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800,moticont@moticont.com or visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlWeb.com
http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – COVID-19 – Linear Actuators for Medical Ventilators and Respirators Available in OEM Quantities!

Motion Control – COVID-19 – Linear Actuators for Ventilators 

motion control ventilator actuators

 

MotiCont-Logo

Van Nuys, CA – Motion Control – During the COVID-19 pandemic engineers and designers of medical devices are working 24/7 to design and manufacture critically needed life support and testing equipment. Moticont has a proud history of supplying precise, reliable voice coil linear actuators used in medical ventilators and respirators, and will be especially quick to respond to the need for actuators in OEM quantities as well as requests for custom prototypes.

Moticont manufactures three lines of linear voice coil actuators that are ideally suited for medical ventilators, respirators, and dispensing of reagents. Each of the pictured actuators are clean reliable voice coil actuators with a guided shaft that is designed to couple directly to the load and therefore has zero backlash. The three lines are the: GVCM series, SDLM series, and DDLM series.

Each of these lines of low cost, clean, brushless, compact actuators features attributes critical to Life Support equipment: Very low Mean-Time-Between-Failures (MTBF), extremely efficient, low hysteresis for greater repeatability, highly controllable force, stroke length, and speed, low noise, maintenance free, and can be easily integrated into new or existing applications. The GVCM series and DDLM series of Linear Voice Coil Actuators can be used with a position sensor and the SDLM series of Linear Voice Coil Actuators has an integral encoder. The DDLM and SDLM actuators are fully enclosed actuators.

For assistance in selecting the best linear actuator for a specific application such as: Life support in ventilators or respirators, reagent dispensing, sampling, sorting, or assembly, contact the Moticont sales team.

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Dyadic actuators are compact mechatronic cylinders that feature a motor, encoder, drive & actuator in one integral package!

Servo2Go-Logo

Greenville, DE —-Motion Control Components – Servo2Go.com has just added remarkable new additions to its broad range of cost-effective 24V electric linear actuators from Dyadic Systems. The SCN6 series actuators are compact yet powerful integrated mechatronic cylinders that feature a motor, encoder, drive and actuator in one integral package.

Dyadic Systems has developed the linear actuator drive mechanism such that the screw and nut are optimized for high accuracy, long life and low cost while delivering high speed and peak thrust. This blend of low-cost and high performance could only have been realized by the advanced technology of Dyadic Systems. These new product concepts give engineers a wider range of options to eliminate over-design.

SCN6 series Mechatronics Cylinders are available in strokelengths to 300mm and 500N (51kgf) maximum thrust and are constructed using an extruded aluminum body with 303 stainless for the shaft and rod tip. Actuators can easily be operated via 24VDC signals from PLCs or relays, and can be connected in networks of up to 16 axes. Servo Actuators from Dyadic feature:

  • Teach pendant, PLC pendant or PC Tool Kit programmable
  • +-0.1mm repeatability
  • 0.3mm backlash
  • 50-300mm stroke versions
  • Up to 200mm/sec max. speed
  • 16 discrete position program capacity
  • IP40 sealed, with optional IP54 sealing
  • Electric actuators – programmable in 15 minutes!
  • The SCN6 starts from only $465 US/ea!
  • Moves can be relative, absolute, force controlled, and more
  • All actuators run on 24VDC – easy to connect to your existing power supply!
  • Air cylinder replacement mode and move sequencing available in the cylinder!

For More for more information on the SCN6 Actuator from Dyadic Systems CLICK HERE!

Be Sure to visit the NEW Servo2Go Website! http://www.Servo2Go.com

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Direct Drive Linear Motors Feature: High Speed, No Backlash, and Zero Cogging!

Motion Control Automation - Moticont Direct drive Linear Motor Motor

Motion Control - MotiCont-Logo

Van Nuys, CA – Motion Control Automation – Moticont’s DDLMs (Direct Drive Linear Motors) eliminate backlash and provide an economical solution for users requiring high acceleration, high speed, and long life.  They are available in three popular off-the-shelf models.  The compact DDLM-019-044-01, linear motor is only 0.75 in. (19.1 mm) in diameter and 1.75 in. (44.5 mm) long. It has a stroke of 0.46 in. (11.7 mm), and features 11.0 oz (3.1 N) of continuous force and 34.8 oz (9.7 N) peak. The compact, longer stroke DDLM-019-070-01, linear motor is also only 0.75 in. (19.1 mm) in diameter but is 2.75 in. (69.9 mm) long. It has a stroke of 0.96 in. (24.4 mm), and features 10.1oz (2.8 N) of continuous force and 32.1oz (8.9 N) peak. For higher force applications the DDLM-038-051-01 linear motor is 1.5 in. (38.1 mm) in diameter and 2.00 in. (38.1 mm) long. It has a stroke of 0.375 in. (9.5 mm) with a continuous force of 3.1 lbs (14.0 N) and 9.9 lbs (44.1 N) peak.

These very compact motors can be easily integrated into new and existing applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.  The feed-back devices, amplifiers and controllers are also available. If a motor with a longer stroke and/or greater force is required please request additional information from the factory.

Typical DDLM direct drive motor applications include: Automated assembly, component insertion, fluid dispensing, pick-and-place, robotics, wafer handling, sorting, valve and flow control, labeling, tension control, and laser machining in the processing, manufacturing, medical, inspection, metrology and other industries.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – No Backlash, Zero Cogging, High Speed Direct Drive Linear Motors with Integrated Encoders Offers High Resolutions to 1.25 µm!

MotiCont-Motion Control Direct Drive Linear Motor

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added two linear motors to it’s SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. These compact drives with a 1.0 in. (25.4 mm) stroke are just 1.00 in. (25.4 mm) in diameter and 3.75 in. (95.3 mm) long. These direct drive linear motors feature resolutions of 5 µm (0.000197 in.) and 1.25 µm (0.000049 in.) The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible accuracy. Each motor features a continuous force rating of 20.1oz. (5.82 N) and a peak force of 66.3 oz (18.4 N). Applications for these SDLM Direct Drive Linear Motors include: Inspection, antenna positioning, medical procedure tables, semiconductor handling, sampling, manufacturing and assembly, laser machining, scanning, adjustable office furniture, dampers, door & valve actuators, and agricultural equipment.

The non-commutating SDLM-025-095-01-05 (5 µm resolution) and the SDLM-025-095-01-01 (1.25 µm resolution) Direct Drive Linear Motors have quiet long life plain linear bearings, a non-rotating shaft, pre-drilled and tapped mounting holes, and threaded (internal) ends of the shaft for easy integration into new and existing applications. These low cost direct drive motors are coupled directly to the load providing high acceleration and speed with zero cogging and no backlash as with other drive systems such as ball screws, gear, and rack and pinion drives.

The SDLM-025-095-01-05 and SDLM-025-095-01-01 Direct Drive Linear Actuators are also available as a complete plug-and-play linear motion system with a matching motion controller

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

 

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net