Category Archives: Driver – Stepper Motor

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems

motion control - stepper motor controller


motion control - stages - customThe tables, depending on length of travel, measure 120 x 120 mm (4.73 in x 4.73 in.), 150 x 150 mm (5.90 in x 5.90 in.) and 160 x160 mm (6.30 in x 6.30 in.) The AQ150 Series has top and side rail covers. Featuring a 4 mm per turn, precision 2 µ backlash lead screw, typical performance specifications of the AQ140 and AQ150 linear stages include: repeatability of 5 µ, positional accuracy 8 µ, straightness 6 µ, driving parallelism 15 µ, pitching 25 arc seconds, and deflection 25 arc seconds.
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

Motion Control – AMC introduces the FE060-25-EM – FlexPro™ Digital Servo Drive!

Motion Control – Digital Servo Drive

Motion Control Digital Drive

 


motion control - electromate logoVaughan, Ontario, Canada — Motion Control Components — Available immediately, the FE060-25-EM is the first servo drive of the new FlexPro™ digital drive family from ADVANCED Motion Controls (AMC). Designed with compact form and power density in mind, the micro-sized FE060-25-EM can outperform larger-sized digital servo drives and still be integrated into tight spaces.

Motion Control – Integrated Single and Multi-Axis Stepper Motor Controller and Driver Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Integrated Stepper Motor Controller and Driver

motion control - integrated stepper motor driver controller

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced their new ICAD Series of integrated motion controllers and drivers for 2-phase stepper motors. Available as 1, 2, 3, and 4 axes modules (pictured) they are ideal for NEMA 8 to NEMA 42 stepper motors. These compact 6.000 in. x 8.000 in. plug-and-play, integrated controllers incorporate high resolution micro-stepping drivers for precise positioning.

motion control - stages - custom

Other features include home and limit switches per axis, joystick interface, TTL/CMOS inputs and outputs, quadrature encoder feedback, USB and optional Ethernet interfaces permits each module to be customized for specific applications. The ICAD series is powered from a single power supply up to +48 VDC. The high voltage power supply allows for high speed operation.

Additional features of these ICAD Series modules include: Low power consumption, auto current reduction, high torque and high speed capabilities, serially or manually controllable, or host controlled. Modes of motion include: Point-to-point positioning, jogging, and coordinated motion.

Another option is to program the motion controller using an easy programing language and store the code in the flash memory for automatic operation. No compiler or assembler is required. User friendly software that allows for easy setup is included. Using the software, an operator can move each axis by using the control panel or a joystick.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES is on Facebook

OES is on Twitter

OES Videos

motion control -oes

 

Motion Control Components – New EtherCAT Drive from Galil Motion Control!

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

 

Vaughan, Ontario, Canada — Motion Control Components — The EDD-3701x EtherCAT slave drive joins Galil’s EtherCAT Family. This family has grown to include two EtherCAT masters and an I/O slave with both digital and analog I/O points. The EDD-3701x is a motor amplifier that operates in an EtherCAT distributed system where there are up to 32 slave drives and one master. It has a daisy chain topology using standard CAT5 Ethernet cables. The EDD-3701x can interface with Galil masters (DMC-500×0 and DMC-52xx0) for sophisticated applications or with TwinCAT® for very simple applications.

The EDD-3701x series has the ability to control brushed, brushless, steppers, and microstepping motors (See Table 1 for more details). Unlike the competition, the EDD-3701x can both control a motor and also has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. All I/O information from these drives are accessible by the EtherCAT master. This capability can eliminate the need for separate EtherCAT I/O devices. The configuration of the EDD-3701x is done using the Galil’s GDK software. Simply connect to a PC via EDD-3701x’s USB port, follow the GDK configuration tool process, and start moving motors. The EDD-3701x also comes with a setup guide to get the user from taking the EDD out of the box to moving motors in a manner of minutes

The EDD-3701x has a small form factor with just 3.9”x5.0”x1.5”. It can operate in either Cyclic Synchronous Position mode (CSP) or Cyclic Synchronous Torque mode (CST). It also accepts quadrature encoder feedback up to 15 MHz.

 

CLICK HERE For additional information on the EDD-3701x EtherCAT Slave Drive

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control – Powerful Microstepping Drive from Servo2Go!

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply!

Servo2Go-Logo

Greenville, DE –— The Motion Control STAC5 microstepping drive provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times.

The STAC5 microstepping drive is available in 120VAC and 220VAC versions, both housed in a compact package.

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply, and features……

  • High performance
  • Built-in power supply & regeneration clamp
  • 120 and 220 VAC models
  • Accepts pulse & direction, streaming commands, stored programming
  • 10/100 MBit Ethernet & EtherNet/IP
  • Advanced anti-resonance
  • Matching high performance motors

All Motion Control STAC5 models include 100Mbit Ethernet communication. The Ethernet interface is used to configure the STAC5 and motor, and also supports the SCL and Q languages over standard Ethernet cabling, addressing and protocols.There are 3 control options available with the STAC5 stepper drives: S, Q and IP.

T• “S” drives can operate in pulse & direction, velocity, and streaming serial (SCL) control modes. To select the control mode, as well as to setup the motor and configure other drive parameters, use the ST Configurator™ software.

• “Q” drives can operate in all of the same control modes as an S drive, plus they have the ability to run stand-alone Q programs stored in non-volatile memory. Q programs are created using the Q Programmer™ software, which provides multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language. Like S drives, Q drives must first be setup and configured using the ST Configurator™ software.

• “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The STAC5-IP drives run all of the same control modes as STAC5-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. STAC5-IP drives are setup and configured using ST Configurator™, and Q programs are created using Q Programmer™.

An encoder feedback option provides position verification, stall detection and/or stall prevention. Applied Motion’s proprietary stall prevention algorithm monitors rotor lag and automatically reduces speed or acceleration to avoid motor stalls, allowing 100% torque utilization. high torque. These are three-phase brushless motors with hall signals for commutation and velocity loop feedback.

The STAC5 can be purchased with a wide range of high torque step motors, optimized for use with the drive. Three lengths of HT23 are available in single and double shaft configurations: HT23-552, HT23-553 and HT23-554, with holding torque ranging from 84 to 255 ounce-inches. Three lengths of HT34 are also available in single and double shaft configurations: HT34-495, HT34-496 and HT34-497, with holding torque ranging from 550 to 1700 ounce-inches.

For more information on the STAC5 Stepper Drives from Applied Motion Products, click on the link below —

https://www.servo2go.com/product.php?ID=105241&cat

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-02401- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link

Motion Control – AMC’s STAC6-Q-H – Advanced Step Motor Drive for Hazardous Locations

Electromate offers AMC-STAC6-Q-H-Stepper Drive

Motion Control - Electromate-Logo

 

The Only Internationally Certified Hazardous Location Stepper Drive Available

 

Vaughan, Ontario, Canada — Motion Control Components – The STAC6 offers best-in-class anti-resonance that ensures optimal performance of the step motor over the widest speed range. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving the highest torque NEMA 34 and 42 frame step motors on the market.

Features include:

  • ATEX and IECEx certified for Class I, Zone 2 locations
  • UL certified for Class 1, Div 2, Group C & D locations
  • HazLoc Step Motor Drive
  • HazLoc certified for USA, Canada, Europe and Middle East
  • Advanced anti-resonance algorithm
  • Torque ripple smoothing
  • Microstepping to 51,200 steps/rev
  • Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
  • Designed for use with high quality NEMA 23, 24, 34 and 42 frame step motors
  • 7 digital inputs, 3 digital outputs, all optically isolated
  • 2 analog inputs, +/-10 volt range
  • Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
  • Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
  • Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
  • Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
  • Output Current: 0.5-6.0 A/phase, peak-of-sine
  • Communication Ports: RS-232, RS-485
  • Idle Current Reduction: 0-100%
  • Setup Method: Software setup
  • Dimensions: 6.35 x 4.66 x 2.31 inches
  • Weight: 32 oz.
  • Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
  • Ambient Humidity: 90% max, non-condensing

CLICK HERE to view more information on the STAC6-Q-H Advanced Step Motor Drive for Hazardous Locations from Applied Motion Products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – AxCent Servo Drives for Centralized Motion Control Systems!

Motion Control Servo2Go-Logo

Motion Control Servo Drives from Servo2GoGreenville, DE — Motion Control – Servo Drives – The AxCent™ Servo Drive (Axes for Centralized control schemes) product platform from ADVANCED Motion Controls brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.

Motion Control AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.

More information on the on the motion control AxCent Servo Drives from Advanced Motion Controls can be viewed at: https://www.servo2go.com/search.php?search=Axcent&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Integrated Stepper Motors with Profinet!

motion control integrated stepper motors

JVL Offers Integrated Stepper Motors with Profinet. The Industrial Ethernet, Profinet, integrates existing systems and equipment bringing the features of Ethernet to the factory floor.

JVL Logo

Birkerød, Denmark and Morrow, OH (USA) –  Motion Control – Recognized as a world leader in integrated motors JVL has added Profinet Industrial Ethernet capabilities to their NEMA 34 Series of integrated steppers with programmable controllers. Available in 4 torque ratings of 3,0 Nm (26.6 in.lb), 6,0 Nm (53.1 in. lb.), 9,0 Nm (79.7 in. lb.), and 12,0 Nm (106.2 in. lb.) these very compact integrated steppers (the MIS340 is just 95 mm (3.74 in. long), include all necessary electronics within the IP67 rated motor housing. the quiet, precision, powerful MIS340 Series steppers are ideal for: Industrial, medical, inspection, testing, and processing applications.

The expanded ethernet protocols of the MIS340 series of integrated steppers from JVL easily connect to Ethernet bus systems such as: EtherCAT, Ethernet I/P, Powelink, ModbusTCP, Sercos III and Profinet. Additionally they are available with bluetooth, ZigBee, WLAN, PLC, RS485, and CANbus. These high performance steppers are also available with separate SMC85 controller. Options include: Electronic gearing, 9.53 mm (0.375 in.) or 14 mm (0.551 in.) diameter shafts, absolute multi-turn encoder, and planetary gear heads.

These high performance steppers feature a very high 409,600 steps per revolution 4,096 microsteps per step) for extremely smooth and quiet operation. The integrated PLC features 8 I/Os, RS-422 and RS485 connections for encoders, and point-to-point or multi axes operations to 254 axes. The 12-80 VDC supply provides high torque (0-9 A RMS (12.6 A peak) at high speed, and the control 12 to 28 VDC can maintain position value, etc. in emergency situations.

About JVL – JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500 W and 13,5 kW peak), and the QuickStep integrated stepper motors (up to 25 Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, AC power supply and bus system integrated into one compact unit. All industrial ethernet busses like Profinet, EtherCat, Ethernet IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules like CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.

JVL with more than 25 years of motion control experience enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications. JVL’s wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

For further information, please contact: JVL Industri Elektronik A/S, Bregnerodvej 127, DK-3460 Birkerød, Denmark. Tel. +45 4582 4440. E-mail: jvlnyt@jvl.dk. Web: www.jvl.dk

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

 

USA and Canada – Reps & Distributors: – Click Here

 

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Bregnerodvej 127, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors Click Here

JVL Logo
Visit our Website
Order Our Catalog
Request Newsletter
JVL-Trade Fairs
Twitter Link
Facebook Link