Category Archives: Brakes

Motion Control – Power-Off Brakes for NEMA 17 & NEMA 23 Servo and Step Motors!

Motion Control

motion control servo brake

Motion Control - Servo2Go-Logo

Greenville, DE —-Motion Control Components – The MPC is a power-off brake module with an output shaft. The unit mounts directly on to a NEMA C-Face servo or stepper motor and the output can also be coupled to a NEMA C-Face gear reducer. This brake is designed to decelerate or hold an inertial load when the voltage is turned off. When voltage is applied, the friction disc is released and the brake is free of torque. This power-off brake is best suited for parking brake applications used to hold a load in position, and is ideal for creating brake motor packages for small servo & stepper frame motors. Key Features:

  • Mounts directly to any NEMA 17 or NEMA 23, frame servo or step motor
  • Includes all necessary mounting hardware
  • 12VDC, 24VDC, 90VDC or 120VAC windings available
  • 12″ lead wire termination
  • Low current consumption
  • Output shaft can be coupled to any NEMA 17 or NEMA 23, frame servo or step motor
  • Optional metric input & output diameters

More information on these New Motion Control Power-Off Brakes for NEMA 17 & NEMA 23 Servo and Step Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/product.php?ID=100229&cat= These and other Motion Control Products are available through www.Servo2Go.com For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Complete Guided Motion Solutions from A to X-Y-Z … … Available from Electromate!

motion control - Linear Guides - Electromate offers Guided Motion Solutions

 

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Bishop-Wisecarver invented and patented DualVee Motion Technology® more than 40 years ago to provide a solution for harsh environment applications where existing technologies were ineffective. DualVee® also proved excellent for long length, smooth motion and low noise requirements.

Linear Guides - Electromate offers Linear Motion Solutions

Today, Bishop-Wisecarver remains the recognized expert and the most trusted name in guide wheel technology, with the widest range of guide wheel based linear motion products in the world

Benefits of Guide Wheel Technology include:

  • Harsh Environments
  • Long Lengths
  • Low Noise
  • Smooth, Low Friction Motion
  • Speeds up to 5.5 meters/sec
  • Acceleration up to 5 g’s
  • High Temperature, Low Temperature
  • Clean Room Options
  • Ease of Assembly, Low Cost Installation
  • Low Maintenance

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

CLICK HERE to view the Bishop-Wisecarver Catalog

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Electromagnetic Brakes & Clutches for Motor Control Available from Servo2Go!

Motion Control Brakes & Clutches available from Servo2Go

Servo2Go-Logo

Greenville, DE —-Motion Control Components – For more than 40 years Inertia Dynamics has been recognized as a global leader in the design and manufacture of technically-advanced industrial clutches and brakes. Inertia’s experienced design and development team utilizes sophisticated test equipment to ensure very high quality and consistency levels to meet the most demanding customer requirements.

Inertia Dynamics offers a full line of electromagnetic clutches and brakes, wrap spring clutch/brakes, motor brakes, controls and moment of inertia measurement equipment.

Long-life Inertia Dynamics products are hard at work in various markets including material handling, food processing, and packaging machinery on applications such as conveyors, filling and cartoning machines and mixers..

Features of Inertia Dynamics Brakes & Clutches:

  • 12V, 24V, 90VDC or 120VAC windings
  • Static torque to 250 lb-in
  • Bore sizes from 1/8″ to 1.5″
  • Low current consumption
  • Low cost
  • Metric bores & special voltages available

CLICK HERE for more information on the Inertia Dynamics’ Spring Applied Brakes available from Servo2Go.com. They can be viewed at: http://www.servo2go.com/supplier.php?id=1031080113

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Low-cost Spring Applied Brakes for Servo and Stepper Motors!

Motion Control Spring Applied Brakes available from Servo2Go

Servo2Go-Logo

Greenville, DE —-Motion Control Components – Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.

The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3″ OD.

Features of FSB Spring Applied Brakes:

  • 12V, 24V, 90VDC or 120VAC windings
  • Static torque to 100 lb-in
  • Bore sizes from 1/4″ to 3/4″
  • Low current consumption
  • Low cost
  • Metric bores & special voltages available

CLICK HERE for more information on the Spring Applied Brakes from Inertia Dynamics.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – NEXEN Eclipse Servo Motor Brakes Deliver Significant Advantages!

Moton Control - NEXEN Eclipse Servo Motor Brakes

NEXEN Servo Motor Brakes

Vadnais Heights, MN – Motion Control Components – Nexen Group’s Eclipse Servo Motor Brakes offer distinct advantages over spring-engaged, electrically-released brakes. With Nexen’s servo motor brake, no energy is consumed when the brake is disengaged. (Electrically-released brakes consume power continuously, even in disengaged mode, creating heat inside the brake, which detracts from its ability to produce full torque.) It is spring-engaged/air-released (no electric coil) to keep the brake cool until it’s needed.

Nexen’s servo motor brakes are designed to mount to the shaft end of servo motors up to 20 horsepower, including NEMA 23, 34 and 42 frame sizes. The brake’s square-shaped housing allows flexibility to custom make the mounting features match the motor dimensions. The brake’s output end duplicates the motor mounting features. The input end bore accepts the motor shaft and is fixed inside the brake with a split-hub/shaft collar arrangement.

Key features and benefits of the Eclipse servo motor brakes:

  • Fail-safe, power-off engagement
  • High torque – 50% more torque than competitive models (torque range 2 to 125 Nm)
  • Zero backlash for accurate holding
  • Integral flanges adapt to any servo motor or AC motor brand and mounting style
  • High torsional rigidity, no system wind-up
  • Models configured to hold the machined end of a ball screw
  • Can be used for intermittent dynamic stopping
  • Spring engaged for holding and E-stop applications
  • High speed capability – engineered and balanced for servo applications

The Servo Motor Brake is a perfect complement to Nexen’s RPS system, holding an accurate position while work is being performed.

About Nexen Group, Inc.

Our heritage is built on producing technically superior products while providing the highest level of customer support. As a leading manufacturer of precision motion control components, power transmission and web tension control products, Nexen works to remain at the forefront of cutting edge engineering and production excellence. Our production capabilities include computerized control and testing systems, dry cutting applications, special coating processes, over 80 multi-axis precision CNC machine tools and automated assembly. By working with Nexen, our customers experience innovations that adhere to industry specifications, optimize their metrics and provide solutions focused on increased uptime, longer machine life and reduced maintenance.

For more information, please visit www.nexengroup.com or call 800-843-7445.

NEXEN Servo Motor Brakes
Visit our Website

Motion Control – Inertia Dynamic’s Servo Brakes & Clutches!

Servo2Go-Logo

motion control clutches brakesGreenville, DE –— Motion Control – Inertia Dynamic’s 36 years of business growth as a world-class manufacturer of clutches and brakes have been marked by a commitment to TOTAL CUSTOMER SERVICE. Your high-quality Inertia Dynamics product will meet or exceed the performance of any brand in the motion control industry.

Our wide product range is used throughout the factory automation and processing sectors and is backed by a dedicated team of customer service professionals that is always available to serve you.

Using a Bolt-on Brake from Inertia Dynamics to create a brake motor for a smaller frame assembly is simple and economical. The Bolt-on Brake is spring set and has a clamp-collar fitting for quick assembly. It can be easily mounted on most standard stepper and servo motors without custom components or special engineering. It is furnished with a built-in shaft that readily accepts a gearbox, a pulley or other parts. This low-cost brake is available for NEMA 17, 23, 34 and 42 frame sizes.

The following lists our full line of Inertia Dynamics products to solve your motion control needs:

  • Electromagnetic Clutches & Brakes
  • Spring Applied Brakes
  • Wrap Spring Clutches & Brakes
  • Motor Brakes
  • Clutch/Brake Controls
  • Moment of Inertia Measurement Instruments
  • Dynacorp Clutches & Brakes

The family of Inertia Dynamics products can be viewed at: https://www.servo2go.com/category.php?cat=10019&sub=10044

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 FREE or e-mail Warren Osak at warren@servo2go.comor visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Brakes for Servos & Steppers from Servo2Go!

Spring Applied Brakes for Servo & Stepper Motors Available from Servo2Go!

Servo2Go - Motion Control Spring Brakes

Servo2Go-Logo

Greenville, DE –Motion Control — Spring Brakes for Servo Motors and Stepper Motors – Available from SERVO2GO! — SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position. These brakes can be mounted to a flange or motor using thru-holes or tapped holes in the field cup. A conduit box is optional.

SAB brakes have been used extensively for servo brake applications. High temperature coil insulations are available upon request. The SAB brakes are rated up to 1200 Lb-in static torque, and fit motors up to 6.5″ OD.

Key Features:

  • 12V, 24V, 90VDC or 120VAC windings
  • Static torque to 1200 lb-in
  • Bore sizes from 3/8″ to 1.5″
  • Low current consumption
  • Low cost
  • Metric bores & special voltages available

To view the specification on the Inertia Dynamics family of Spring Applied Brakes available from Servo2Go – Click on the link below

https://www.servo2go.com/product.php?ID=100511&cat

Inertia Dynamics Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link