Category Archives: Actuator – Linear

Motion Control – ADVANCED Motion Controls 60Amp Micro-Sized FlexPro Servo Drives are available from Electromate!

Motion Control – Micro-Sized Servo Drives!

motion control - micro servo drive


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A continuous. The 60A continuous current rating is 33% higher than previous models for the same size making these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded, and Development Board-factors.

Linear Motion Control – Linear Motors: How Do They Work?

Motion Control – What is a Linear Motor?

motion control - h2w

 

motion control - linear motor tutorial

 

 

Motion Control White Paper – A linear motor should be thought of as a rotary electric motor that has been cut along a radial plane and unrolled. The resultant motor is a direct drive linear electric motor that can produce linear motion without the need of pneumatic, hydraulic cylinders, or translation of rotary to linear motion with the use of belts or screws. Rotary motors produce torque whereas linear motors produce linear force.

Motion Control – 1 Inch Diameter Open Aperture Voice Coil Motor Has 1 Inch Stroke and High Force-to-Size Ratio!

Motion Control – Open Aperture Voice Coil Motor!

motion control - voice coil motor

motion control - moticont

 

 

Van Nuys, CA — The 1.00 inch body diameter open aperture voice coil linear motor, the HVCM-025-038-003-02, featuring an open aperture and high force-to-size ratio is introduced by Moticont. This small brushless servo motor is capable of high acceleration, deceleration, high speed, zero cogging, and zero backlash when connected directly to a load. All HVCM open aperture brushless servo motors are extremely quiet, clean room compliant, and capable of high precision when used in closed loop applications. This DC voice coil servo motor has a continuous force rating of 1.0 lbs (4.6 N) and a peak force of 3.2 lbs (14.4 N) at a 10% duty cycle.

Motion Control Application – Open Screw Drive System Moves Heavy Sound Stage Sets Smoothly, Quickly, and Quietley!

Motion Control Application – High Speed Drive System

motion control - application


motion control - lm76

 

 

E. Longmeadow, MA –Motion Control Application-

Problem: Move heavy sets on a sound stage smoothly, quickly, and most importantly quietly! Ball screws specified in the original design proved unacceptable due to the limited length of travel, screw deflection which resulted in a lack of smoothness, and high noise levels. A rack and pinion was also considered but the noise level was also too high and there was no room for a gearbox. Linear motors are quiet however the cost was prohibitive, and a belt system could not handle the heavy loads.

Solution: The new Streamliner Open Screw Drive System from Winner was selected by the production company to move the heavy sets on the sound stage.

Motion Control – Robotic Cycloidal Gearbox from GAM is available from Electromate!

Motion Control – Robotic Cycloidal Gearbox!

motion control- cycloidal gearbox


motion control - electromate logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque. The GCL series is available in a wide range of sizes with ratios from 36:1 to 192:1.

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motion Control – Moticont Adds 1 Inch Stroke, Direct Drive Linear Actuator to Their Patented SDLM Series of Electric Cylinders!

Motion Control –  Electric Cylinders!

motion control - electric Cylinder


motion control - moticont
Van Nuys, CA — Motion Control – The SDLM Series of Electric Cylinders from Moticont now includes a 1.0 inch (25.4 mm) stroke actuator in their compact 0.750 in. (19.1 mm) diameter series of linear actuators. The new SDLM-019-095-01-01 actuator features a continuous force of 6.8 oz (1.9 N) and a peak force of 21.6 oz (6.0 N). A precision linear optical quadrature encoder is integrated and protected inside the actuator housing.

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA –The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - miniature components

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - linear motion products

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear slides

Motion Control – Maxon drives are on the Red Planet with NASA’s Perseverance Rover!

Motion Control – Application – Maxon drives on the Red Planet!

In July, NASA sent its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover also carried a helicopter that is performing flights on the Red Planet. maxon’s precision DC and BLDC motors are used for numerous mission-critical tasks.

motion control - maxon motors

 


motion control - maxon motorTaunton, MA — Motion Control Products & Application – maxon drive systems are very familiar with Mars. Our drives have been used in virtually every successful robotic mission over the last three decades. There are now more than 100 of them on the Red Planet and there are likely to be more soon. The launch window for NASA’s next mission opens on July 22nd. An Atlas V rocket will launch the new Perseverance rover on its way to Mars, where it will be searching for signs of previous life on the planet. Its most important job is to take multiple soil samples, seal them in containers and deposit them on the surface of Mars so that a future mission can return them to Earth. Several maxon motors will be used to handle the samples inside the rover. For example, maxon DC motors are installed in the robotic arm, which moves the samples from station to station. Maxon motors will also be used for sealing and depositing the sample containers.

NASA’s Jet Propulsion Laboratory (JPL), is carrying out the mission, and have asked maxon to produce 10 drives for the rover. As with almost all previous Mars missions, these drives are based on standard products from maxon’s catalog with modifications. For the first time, NASA is using brushless DC motors, including: nine EC 32 flat and one EC 20 flat in combination with a GP 22 UP planetary gearhead. Working closely with JPL specialists, maxon engineers developed the drives over several years and tested them thoroughly to achieve the highest standards of quality. “We’ve learned a lot from this exciting project,” says Robin Phillips, head of the maxon SpaceLab. “We now have very broad expertise in space applications and have established quality assurance processes that meet the expectations of the industry. Customers from other industries such as the medical sector, where requirements are often similar, can also benefit from this know-how.”  Space missions place the highest demands on drive systems. This includes vibrations during the rocket launch, vacuum during the journey, impacts on landing, and the harsh conditions on the surface of Mars, where temperatures fluctuate between -125 and +20 degrees Celsius and dust penetrates everywhere

Maxon DC motors control the Mars helicopter.

motion control - maxon mars motor

The Perseverance rover is expected to land on Mars on February 18, 2021 – but it won’t be alone. A drone helicopter called Ingenuity will be attached to the underside of the rover. It weighs 1.8 kilograms, is solar powered and will perform several short flights, as well as take aerial images. The main goal of this experiment is to test the concept for further drones of this kind. maxon has six brushed DCX motors with a diameter of 10 millimeters controlling the tilt of the rotor blades and the direction of flight. The drives are very light, dynamic and highly energy-efficient. These properties are crucial, because every gram counts on the Mars helicopter. Flying on Mars is not easy. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The drone helicopter has flown in a simulated test environment in the JPL laboratory. Whether it will lift off on Mars remains to be seen. First, other obstacles, such as the rocket launch, must be successful. “We hope that everything goes well and that we’ll soon see our drives in action on Mars,” says maxon CEO Eugen Elmiger. “We’re all keeping our fingers crossed.”

motion control -maxon miniature motors

For additional information, please contact us at info.us@maxongroup.com or 508-677-0520.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com/maxon/view/content/index

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Dual Feedback Voice Coil Positioning System!

Motion Control – Positioning Stage
motion control voice coil positioning stage


motion control - h2w

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies’ latest custom voice coil positioning stage (VCS08-350-LB-01-MC-F) was developed to meet the dual feedback requirements of the customer. This closed loop system allowed the user to monitor both position and force simultaneously and adjust accordingly. It incorporates a voice coil motor (NCC08-34-350-2X) which generates a continuous/peak force of 35.0 lbs [156 N]/105 lbs [467 N] with a total stroke length of 0.80 in [20.3 mm].

Miniature Linear Focus Actuator Features <50 Nanometer Positioning Resolution!

Motion Control – Miniature Linear Focus Actuator

motion control - linear focus actuator

LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

motion control - Miniature actuators

Forestville, CA — Motion Control Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Vacuum Compatible Voice Coil Actuator with Integrated Thermal Sensor

Motion Control – Vacuum Compatible Voice Coil Actuator

motion control -linear actuator


motion control- h2wSanta Clarita, CA —– Motion Control – H2W Technologies, Inc. has designed and manufactured a non-commutated DC actuator, otherwise known as a
voice coil actuator, designed for vacuum operation in a cryogenic environment. H2W has worked with several aerospace customers, developing manufacturing processes and material selection to provide customers with the ability to design motors with low-outgassing in UHV conditions, which meet NASA’s Collected Volatile Condensable Materials and Total Mass Loss requirements.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder
motion control - moticint

 

 

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Motion Control – SMAC expands their electric actuator family to include the New LBR40 Series Linear Rotary Actuator!

Motion Control – Linear Rotary Actuator!

motion control - linear rotary actuator

 


motion control - electromate

 

 

Vaughan, Ontario, Canada — Motion Control Components — The LBR40 is a slim, stackable linear rotary actuator with a SMAC HT35 direct drive brushless motor. Encoder resolutions are available from 5 micron to 1um for application flexibility to optimize on position control. Priced competitively with the added benefit of real time feedback of data required to assure quality. IP67 protection is available as well as a built-in controller with popular communication protocols.

Motion Control – LDL25 Series Linear Actuator, available from Electromate, is a cost-competitive alternative to pneumatics!

Motion Control – Linear Actuator

Cost-competitive Alternative to Pneumatics, Starting at $300 US/ea
motion control - electromate logo

motion control - linear actuator

 

 

Vaughan, Ontario, Canada — Motion Control Components — The LDL has been designed as a cost-competitive alternative to pneumatics. A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: control, cycle life, operating cost and environment, etc. The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US.

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Electric Cylinder has Increased Throughput!

 

motion control - electric cylinder

motion control - moticont
Van Nuys, CA — The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – the LFA-3403 Is an Open Apeture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.