Category Archives: Linear Motors

Motion Control – High Speed, Closed Loop Linear Motion Positioning Stage from H2W Technologies!

Motion Control – High Speed Positioning Stage

motion control - positioning stage

motion control- h2w

Santa Clarita, CA —– Motion Control – The SRS-006-06-050-01-EX single rail positioning stage is ideal for high-speed closed loop positioning applications that require both short and long travel distances. It uses a brushless linear motor to generate a continuous/peak force of 50 lbs [220 N]/150 lbs [660 N] with a total stroke length of 5.75 in [146 mm]. The non-contact 1 micron resolution encoder allows for precise position control. It is guided by a pair of recirculating ball linear bearings on a precision linear bearing rail.

The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request.

Features:

  • Single extrusion lengths up to 6 meters long allowing for long strokes
  • Ability to run multiple independently controlled motor heads on a single magnet track
  • Custom strokes, forces, and feedback resolution configurations available
  • Fully integrated programmable motion control electronics to allow for closed loop position control are available

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W YouTube Videos

H2W Blog

motion control- h2w

Motion Control – Don’t Just Settle! Select the “Right” Miniature Linear Voice Coil Motor for the Application!

Motion Control –  Miniature Linear Voice Coil Motor!

motion control - moticont

 


motion control - moticintWhether it is a longer stroke or a higher force that is required for an application, each of these highly efficient, clean, miniature brushless DC servo motors has high acceleration / deceleration, low inertia, and zero cogging, making them ideal for: Assembly, sorting, laser machining and drilling, haptic feed back, packaging, sampling, work holding and clamping, scanning, laser beam steering and filtering, wafer handling, and medical and pharmaceutical applications. Both the LVCM-025-038-01 and the LVCM-025-038-02 feature very high accuracy and repeatability when operated as a DC servo motor in a closed servo loop. Each linear motor also features a 10-32 UNC-2B threaded mounting hole in the housing and two 6-32 UNC-2B threaded mounting holes in the coil end on 0.50 in. (25.4 mm) centers for easy integration into new and existing applications. A complete plug-and-play system including an encoder and servo controller is also available.Van Nuys, CA — Motion Control Components – Moticont has added two miniature linear voice coil motors to its LVCM family of Linear Voice Coil Motors! Sharing the same physical dimensions, each is just 1.000 in. (25.4 mm) in diameter and the housings are 1.500 in. (38.1 mm) long. As every application is different Moticont offers two motor in the LVCM-025 Series of Voice Coil Motors. The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

If there a need for a still smaller or larger diameter motor, one with longer travel, or more force? There are 12 choices in this family of Moticont’s LVCM linear motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticint

 

Motion Control – Tolomatic Actuator Rated up to 50,000 pounds of force!

Motion Control – High Force Actuator to 50,000 Lbs!

motion control - Tolomatic high force actuators

 


Vaughan, Ontario, Canada — Motion Control — Tolomatic’s expanded extreme-force electric actuator family now includes the RSX128 actuator, rated up to 50,000 pounds of force (222.4 kN). Designed for replacing hydraulic cylinders and designed for 100 percent duty cycle, the RSX actuator features Tolomatic’s precision-ground planetary roller screws for operating life in challenging environments. Applications include assembly, metal fabrication (pressing, punching, clamping), automotive manufacturing, timber processing, motion simulators and more.

The RSX128 actuator represents a 60-percent increase in the bi-directional maximum force provided by Tolomatic’s extreme-force RSX electric actuator family. Additional frame sizes include the RSX080 which provides 18,000 lbf/80kN and the RSX096P press-model which is optimized to provide extend force up to (40,000 lbf/178 kN).

For all models, IP65 is standard for protection against dust and water spray. IP67 is optional for improved resistance of water ingress. A modified food-grade version, designed for volumetric filling and other high-force food-and-beverage applications, is available as a custom design with food-grade white epoxy coating and stainless-steel components to meet the requirements of washdown applications.

The entire RSX actuator family’s construction includes tie-rods and Type III hard-coat anodized aluminum housings. A standard internal anti-rotate feature prevents the rod from rotating without external guidance.

CLICK HERE for information on the RSX128 actuator from Tolomatic can be viewed at:

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate

Motion Control – Hybrid Air Bearing XZ Positioning System from H2W Technologies!

Motion Control – Air Bearing Positioning System!

motion control - xz positioning stage

 


motion control- h2wSanta Clarita, CA —– Motion Control – This hybrid air bearing XZ positioning system uses H2W air bearing linear stepper motor STS-1220-AP4T (horizontal axis) and voice coil positioning stage VCS05-060-LB-01-MH (vertical Z-axis). The horizontal Air Bearing Linear Stepper motor has a 38.0 in [965 mm] stroke and generates 12.0 lbs [53.1 N] of continuous force. It is guided by precision roller bearings along the platen. Integral air bearings are used to maintain the required motor air gap. The vertical Z-axis motor has a 0.50 in [12.1mm] stroke; generates 6.0 lbs [26.7 N] of continuous force and 118.0 lbs [80.1 N] of peak force. The 1.0-micron resolution encoder allows for precise closed loop positioning. It comes supplied with bearings that allow smooth and rigid motion. The motor coil is the moving part of the assembly in order to reduce the moving mass of the axis.

Features:

  • Wall mountable
  • Two axis of coordinated motion
  • Cable carriers to route payload cables

Multi-Axis Stage

Product Details

Horizontal Axis (Single Axis Air Bearing Linear Stepper)

Motor P/N STS-1220-AP4T

Stroke 38 in 965 mm

Force 12 lbs 53.1 N

Vertical Z-Axis (Voice Coil Motor Stage)

Motor P/N NCC03-15-050-2X

Stroke 0.25 in 6.4 mm

Encoder Resolution 1 micron

Force @ 100% Duty 5.0 lbs 22.3 N

Force @ 10% Duty 15.0 lbs 66.8 N

See Video at Youtube:

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

motion control- h2w

H2W YouTube Videos

Visit our Blog

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control - linear actuator


motion control - moticintThe SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticint

Other Components from Moticont

Moticont Videos

Motion Control – Moticont Voice Coil Motor with Internal Shaft and Bearing Features 3.75 Inch Stroke Length!

motion control voice coil motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – The GVCM-051-127-01 Linear Voice Coil Motor is Moticont’s newest linear DC Motor with Internal Shaft and Bearing. The 3.75 in. (95.3 mm) stroke of the precision ground 0.236 (6.0 mm) diameter shaft with an internal thread, is guided by a long-life plain bearing that can allow side loads up to 1 lb (4.4 N). The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into existing and future applications. This brushless voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size ratio of 5.0 lbs (22.2 N) continuous force and 15.8lb (70.3N) of peak force in either direction, in a housing measuring just 2.00 in. (50.8 mm) dia. x 5.00 in. (127.0 mm) long.

Clean, quiet, efficient, with low inertia the GVCM-051-127-01 Linear Voice Coil Motor is ideal for: Assembly and sorting equipment, work holding and clamping, medical devices, wafer handling, optical focusing, antenna positioning, testing, slide actuators, shutters, doors and valve actuation.

Moticont’s GVCM-051-127-01 Linear Voice Coil Motor can be ordered as a complete plug-and-play system including an encoder and servo controller for precise closed-loop operation. Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800,moticont@moticont.com or visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlWeb.com
http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control Voice Coil Actuators Used in Ventilators Available in 4 Weeks from Receipt of Order!

Motion Control – Voice Coil Actuators Used in Ventilators 

To help deal with the COVID-19 pandemic these actuators are available in OEM quantities in 6 to 8 weeks from receipt of order!

motion control Actuator for Medical Ventilators

motion control company -H2W Technologies

When three-phase AC power is applied to the primary, a travelling electromagnetic flux wave is induced and moves relative to the primary. The wave induces an electric current in the conductive reaction plate. The induced electric current interacts with the magnetic flux to produce a linear force. The speed of the motor can be varied by changing the input frequency using an adjustable frequency drive.

 

The actuator utilizes a unique electromagnetic circuit design. This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60 in. [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.  Each actuator is guided by sliding contact bushing assemblies. Voice coil actuators are ideal for applications that require quick, short moves with fast settling times.

 

Features

  • – High Speed
  • – Low-profile
  • – Long bearing life in a high cycle environment
  • – No moving cables
  • – High acceleration
  • – Compact footprint
  • – Custom strokes and force configurations available

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LinearMotionBlogger.com

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – COVID-19 – Linear Actuators for Medical Ventilators and Respirators Available in OEM Quantities!

Motion Control – COVID-19 – Linear Actuators for Ventilators 

motion control ventilator actuators

 

MotiCont-Logo

Van Nuys, CA – Motion Control – During the COVID-19 pandemic engineers and designers of medical devices are working 24/7 to design and manufacture critically needed life support and testing equipment. Moticont has a proud history of supplying precise, reliable voice coil linear actuators used in medical ventilators and respirators, and will be especially quick to respond to the need for actuators in OEM quantities as well as requests for custom prototypes.

Moticont manufactures three lines of linear voice coil actuators that are ideally suited for medical ventilators, respirators, and dispensing of reagents. Each of the pictured actuators are clean reliable voice coil actuators with a guided shaft that is designed to couple directly to the load and therefore has zero backlash. The three lines are the: GVCM series, SDLM series, and DDLM series.

Each of these lines of low cost, clean, brushless, compact actuators features attributes critical to Life Support equipment: Very low Mean-Time-Between-Failures (MTBF), extremely efficient, low hysteresis for greater repeatability, highly controllable force, stroke length, and speed, low noise, maintenance free, and can be easily integrated into new or existing applications. The GVCM series and DDLM series of Linear Voice Coil Actuators can be used with a position sensor and the SDLM series of Linear Voice Coil Actuators has an integral encoder. The DDLM and SDLM actuators are fully enclosed actuators.

For assistance in selecting the best linear actuator for a specific application such as: Life support in ventilators or respirators, reagent dispensing, sampling, sorting, or assembly, contact the Moticont sales team.

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control Products – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!

Motion Control Products – Voice Coil Linear Actuator

 

MotiCont-Logo

Van Nuys, CA – Motion Control Products – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators. This clean, compact, voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.

The precision ground 0.1572 (3.993 mm) diameter shaft has an internal thread, and the housing has threaded mounting holes on each end for easy integration into current and future applications. This clean, quiet, efficient, low inertia, brushless actuator featuring an internal shaft and recirculating ball bearing is ideal for: Medical devices, antenna positioning, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser machining and drilling, wafer handling, optical focusing, and dynamic vibration absorption,. The Moticont’s GVCM-051-025-01 linear voice coil motor can also be ordered as a complete plug-and-play system including a position sensor, and controller.

There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlWeb.com
http://MotionShop.net

http://Catalogs-MotionControl.com

 

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control Products- Voice Coil Motor with Internal Shaft and Bearing Features 63.9 lbs of Continuous Force!

Motion Control Products- Voice Coil Motor
motion control products - voice coil motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Products – Moticont has added a new high force voice coil motor to its GVCM family of voice coil motors with an internal shaft and bearing. The new GVCM-095-089-03 Linear Voice Coil Motor (also known as linear DC motor) features a continuous force of 63.9 lbs (284.1 N) and 202.0 lbs (898.4 N) of peak force at a 10% duty cycle.

Guided by a long-life plain bearing that can allow side loads up to 3 lb (13.5 N), the precision ground 0.236 inch (6.0 mm) diameter shaft with an internal thread has a stroke length of 0.5 in. (12.7 mm). The quiet, efficient, smooth, cog-free motion of this low inertia brushless GVCM-095-089-03 Linear Voice Coil Motor is ideal for: Clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, testing, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.

This new voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size in either direction, in a housing measuring just 3.75 in. (95.3 mm) dia. x 3.5 in. (88.9 mm) long. The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into new and existing applications.

Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s expanding line of GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://www.moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Products from Moticont featured on:

http://MotionShop.com.com  The “Motion Control Newsletter”

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos