Category Archives: Gearbox -Speed Reducer

Motion Control – Maxon’s innovative Product Developments

Motion Control –  New, Innovative Products

Maxon introduces standout products for 2023-2024!

motion control - 6 mm diameter motor

Fall River, MA — Motion Control – This year’s Hannover Messe (April 17–21, 2023) featured maxon’s latest product developments, along with new 2023/2024 product catalog with more than 600 pages of drive technology. Standout products include the brand new ECX PRIME 6, and the EC frameless DT motors series’ new sizes 65 and 85.

motion control - maxon

maxon’s exhibit this year was entirely based around the theme of “more torque and more dynamics in the smallest of spaces.” At its ultra-modern booth, the leading supplier of electric drives and systems gave a first-hand presentation of exciting solutions. The spotlight was on the new ECX PRIME 6: the first size from the new ECX PRIME motor family.

Motion Control – New Miniature Gearhead from Harmonic Drive LLC: The CSF-2XH

Motion Control – Miniature Harmonic Drive Gearhead!

THIS ZERO BACKLASH MINI GEARHEAD IS IDEAL FOR SERVO & STEPPER MOTOR APPLICATIONS

motion control - miniature harmonic drive gearhead
motion control electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control – Electromate – Harmonic Drive LLC, a leading provider of precision motion control solutions, is proud to announce the release of its CSF-2XH mini gearhead designed for servo and stepper motors.

Available with an output shaft or flange, the CSF-2XH miniature gearheads are offered in 4 sizes with gear ratios 30:1 to 100:1 and peak torque: .5~28Nm. These mini strain wave gears are ideal for semiconductor and robotics applications.

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

Motion Control – Maxon’s Driven Magazine

motion control driven magazine

 

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application.  An application that could be on Mars, under water, or even implanted in the human body!

motion control - maxon

 

 

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application.   

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control – New LDL Programmable Linear Actuator from SMAC

Motion Control – A Great Place to Work!

motion control - smac linear actuatorsCost-competitive Alternative to Pneumatics, Starting at $300 US/ea

Motion Control – Vaughan, Ontario, Canada – The New LDL Programmable Electric Linear Actuator from SMAC has been designed as a cost-competitive alternative to pneumatics.  A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: increased control, improved cycle life, and reduced operating cost.

The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US/ea. 

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

 

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – maxon launches light and invisible e-bike system!

Motion Control – Light and Lnvisible e-bike system!

Motion Control – First, maxon’s drives flew on Mars in the NASA helicopter – now they’re letting bike riders lift off.

motion control - invisible electric bike system


motion control - maxon motors

 

 

Taunton, MA — Motion Control – After several years of development, the company presents the BIKEDRIVE Air – a light and invisible e-bike system consisting of a mid-mounted motor, integrated battery, and control element. It can be used to build extremely lightweight racing, gravel, urban, and mountain bikes. The first bicycles made by maxon customers will be introduced to the market this year.

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

Motion Control – Mecademic Robotics releases new firmware!

motion control - electromate robotics


motion control - electromate roboticsVaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its
Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control – Planetary Robotic Gearbox Available from Electromate!

Motion Control – Planetary Gearbox for Robotics

motion control - planetary gearbox
Patented design guarantees that backlash will not increase over the life time of the gearbox

motion control - electromate roboticsVaughan, Ontario, Canada — Motion Control Components — The GPL-V (shaft) and GPL-H (hollow) are our lowest backlash (≤ 0.1 arc minute ) planetary gearboxes for horizontal and vertical robotic applications. A patented design guarantees that the backlash will not increase over the life time of the gearbox. Very high tilting rigidity results in excellent positioning accuracy with a rated 20,000 hours which is over 3x longer than comparable gearboxes in the market.

The noise level of 65dB compared to 69dB of comparable models makes it ideal for MRI applications where low noise levels are critical.

The efficiency is over 90% compared to 70 – 80% of other models allowing for lower power consumption which could result in choosing a smaller motor.

Motion Control – Integrated Spindle Drive Motor with Absolute Multi-Turn Encoder from JVL is available from Electromate!

Motion Control – Integrated Spindle Drive Motor

motion control - integrated motors


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Products — JVL A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing a new addition to its ServoStep™ motors, a directly mountable motor for driving spindles. It’s perfect for replacing hand wheels in format change applications.

All-in-one unit

ServoStep™ has everything built-in including motor, encoder, drive electronics, control electronics with ePLC™ and optional Ethernet or CAN bus integrated into one compact unit.

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – Robotic Cycloidal Gearbox from GAM is available from Electromate!

Motion Control – Robotic Cycloidal Gearbox!

motion control- cycloidal gearbox


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque. The GCL series is available in a wide range of sizes with ratios from 36:1 to 192:1.

Motion Control – Maxon introduces a multi-axis controller for highly dynamic positioning tasks!

Motion Control – Miniature Multi-axis Controller

Maxon is launching the next generation of Motion Controllers with its MiniMACS6-AMP-4/50/10. The controller is ideal for use in applications where PLC solutions may be too expensive or cannot meet customer-specific requirements.

motion control - miniature controller

Taunton, MA — Motion Control Products – Maxon’s new multi-axis controller, the MiniMACS6-AMP-4/50/10, offers precise and highly dynamic control of up to six brushed DC motors or four brushless DC motors (up to 540 W continuous output power and 1.6 kW peak output power).

motion control - maxon motors

 

 

The controller is an economical and compact solution for system designers who develop autonomous robots or shuttle systems

A significant advantage of the new multi-axis solution is that it is programmable with the comprehensive ApossIDE automation software and the license-free Motion Control Library (written in C). Integrated bus interfaces enable efficient data exchange with higher-level controllers; however, it is also possible to run complete process sequences autonomously, without a PLC or PC. The MiniMACS6-AMP-4/50/10 will be available in early 2021.

Motion Control – Maxon drives are on the Red Planet with NASA’s Perseverance Rover!

Motion Control – Application – Maxon drives on the Red Planet!

In July, NASA sent its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover also carried a helicopter that is performing flights on the Red Planet. maxon’s precision DC and BLDC motors are used for numerous mission-critical tasks.

motion control - maxon motors

 


motion control - maxon motorTaunton, MA — Motion Control Products & Application – maxon drive systems are very familiar with Mars. Our drives have been used in virtually every successful robotic mission over the last three decades. There are now more than 100 of them on the Red Planet and there are likely to be more soon. The launch window for NASA’s next mission opens on July 22nd. An Atlas V rocket will launch the new Perseverance rover on its way to Mars, where it will be searching for signs of previous life on the planet. Its most important job is to take multiple soil samples, seal them in containers and deposit them on the surface of Mars so that a future mission can return them to Earth. Several maxon motors will be used to handle the samples inside the rover. For example, maxon DC motors are installed in the robotic arm, which moves the samples from station to station. Maxon motors will also be used for sealing and depositing the sample containers.

NASA’s Jet Propulsion Laboratory (JPL), is carrying out the mission, and have asked maxon to produce 10 drives for the rover. As with almost all previous Mars missions, these drives are based on standard products from maxon’s catalog with modifications. For the first time, NASA is using brushless DC motors, including: nine EC 32 flat and one EC 20 flat in combination with a GP 22 UP planetary gearhead. Working closely with JPL specialists, maxon engineers developed the drives over several years and tested them thoroughly to achieve the highest standards of quality. “We’ve learned a lot from this exciting project,” says Robin Phillips, head of the maxon SpaceLab. “We now have very broad expertise in space applications and have established quality assurance processes that meet the expectations of the industry. Customers from other industries such as the medical sector, where requirements are often similar, can also benefit from this know-how.”  Space missions place the highest demands on drive systems. This includes vibrations during the rocket launch, vacuum during the journey, impacts on landing, and the harsh conditions on the surface of Mars, where temperatures fluctuate between -125 and +20 degrees Celsius and dust penetrates everywhere

Maxon DC motors control the Mars helicopter.

motion control - maxon mars motor

The Perseverance rover is expected to land on Mars on February 18, 2021 – but it won’t be alone. A drone helicopter called Ingenuity will be attached to the underside of the rover. It weighs 1.8 kilograms, is solar powered and will perform several short flights, as well as take aerial images. The main goal of this experiment is to test the concept for further drones of this kind. maxon has six brushed DCX motors with a diameter of 10 millimeters controlling the tilt of the rotor blades and the direction of flight. The drives are very light, dynamic and highly energy-efficient. These properties are crucial, because every gram counts on the Mars helicopter. Flying on Mars is not easy. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The drone helicopter has flown in a simulated test environment in the JPL laboratory. Whether it will lift off on Mars remains to be seen. First, other obstacles, such as the rocket launch, must be successful. “We hope that everything goes well and that we’ll soon see our drives in action on Mars,” says maxon CEO Eugen Elmiger. “We’re all keeping our fingers crossed.”

motion control -maxon miniature motors

For additional information, please contact us at info.us@maxongroup.com or 508-677-0520.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com/maxon/view/content/index

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – maxon celebrates International Women in Engineering Day!

Motion Control – maxon celebrates International Women in Engineering Day!

The women in engineering (WIE) at maxon work eagerly to contribute to the success of advanced technology in the motion control industry. This week in honor of International Women in Engineering Day, June 23, 2021 – maxon wishes to thank these engineering women for their contributions as they continue to help shape the world we live in.

motion control - engineers


motion control - maxon motorsTaunton, MA — Around the globe, the maxon women in engineering are working on motion control applications with their customers, they focus on new product designs to implement the latest technologies and continue to research new concepts and ideas for drive systems to be used in motion control applications found in Medical, Industrial Automation, Aerospace and Defense, and Mobility industries.

Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!

Motion Control Application – Motors

They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.

motion contyrol - motor application


motion control - maxonTaunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.

Motion Control – Maxon precision motors Go to Mars AGAIN!

Motion Control – Maxon motors on Mars!

motion control - miniature motors

 

motion control - maxon logo

 

 

Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.

Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.

Motion Control – Large Hollow Shaft Harmonic Drive Gear Unit Available from Electromate!

Motion Control – Hollow Shaft Harmonic Drive Gear Unit

motion control - harmonic Drive

 


Vaughan, Ontario, Canada — Motion Control Components — The new FBS-2UH gear unit series from Harmonic Drive® features a large, hollow shaft with a compact outer diameter. The extra large hollow shaft is ideal for robots and machines requiring complex cabling to pass through the axis of rotation.

The new gear unit design features Harmonic Drive’s “S” tooth profile for optimal tooth engagement resulting in high torque, high-torsional stiffness, long life and smooth rotation.

The FBS-2UH Series is available in two sizes (25, 32) and three ratios (30:1, 50:1, and 100:1).

Key features include:

  • Extra large hollow-shaft diameter is our largest yet for a standard product
  • Compact dimensions for use in robotics
  • Outer diameter and hollow bore optimized for design flexibility and performance
  • Zero Backlash
  • Accuracy <1 arc-min
  • High torsional stiffness
  • High efficiency
  • Smooth operation

CLICK HERE for information on the FBS-2UH hollow-shaft gear unit.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

 

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

 

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics!

Motion Control – Maxon and ANYbotics form New Partnership!

Motion Control Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics and will in future supply the drive systems of the autonomous ANYmal inspection robot. The robot will soon be marketed in large quantities. This cooperation will also benefit maxon, since ANYbotics provides important robotics know-how and is currently the most successful young company in this field.

motion control - maxon to supply drive systems

motion control - maxon logoThe maxon Group contributes 60 years of experience in drive technology to the partnership, as well as a global production infrastructure and validated processes, and will help to advance the industrialization and commercialization of ANYmal – with competitive, high-performance drive systems, twelve of which are used in each robot. “In maxon, we have found the ideal partner for taking care of our drive technology as we transition from small series to mass production.